Re: NW Install Day/BBQ #2 - Sunday June 12th
 

ya,i seen an episode of ER once,i could have done it ;D

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

Piping should be interesting to do, you may want to get some 2in-2.5in adapters (or whatever size your compresor outlet pipe is) Also may want to get some 90 degree rubber bends or something since the compressor is going to be facing the Pass side.

Dumptube piping

Assuming were using a external gate, you would need to get some 1.5in mandrel piping, like 1 Ubend from JCwhitney will be fine.

Something like this
https://www.homemadeturbo.com/turbo/b20/b20mock2.jpg


Fluids?

4 quarts of oil should be fine. May want to toss a new filter on too, since we gotta take it off.

Hose clamps?

Get all kinds of different sizes, make sure you have enough for all your charge piping. It's better to have to many than not enough ;)

Vac line and T's

Get a couple (3-4) feet of 5/16 (or smaller) vac line, so we can T into everything.

180 Ubends for downpipe, and possibly a flex section and flanges

1 2.5in U bend is enough for the downpipe, and if you want a flex section you better get that too if you want us to hook the downpipe up to your exhaust. Otherwise your gonna roll open DP.

Flanges and Flex Section can be bought at
http://www.roadraceengineering.com/h...eekerparts.htm


If you need to get ahold of beau, just PM him on here! Pat's outta the freaking loop.

Jeff

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

we have whatever bends are left from johnny's piping i gave him at teds, plus i have another 90, unless you think 3" wont fit for the downpipe???

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

I'll bring my 1 90 just in case. its 2.5 inch.

can someone pm me the address?

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

3in is gonna be to big for a downpipe with AC.. is it possibly ? yes.. but 2.5 is just way easier to work with.

Re: NW Install Day/BBQ #2 - Sunday June 12th
 

Buahahaha I know. I was on Vicodin so everything was good :)

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

could i get an addy also? im possibly going to meet up to get some slicks off of Civic ZC. nice thing is my car is actually running nice right now. *knocks on wood*

NEUMAN

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

Not gonna make it. With the other guys taking vacation at work, and my Vegas time off, I have to work until 4:30 Sunday.

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

hrmm, who can solder?

Re: NW Install Day/BBQ #2 - Sunday June 12th (we're good to go)
 

i cant go.