NOTHING is EVER Easy.
 

God damn it.

Forgive me, but I must ------- vent. First the ---- with my damn D series and its broken block threads. Well now the new motor has a bolt that was broken in the block (near the water pump) that was broken off by someone else!!

So I get out the tap and remove bit, and that fucker breaks...

Now I have a hole, with a bolt, and half of a bit in it...

----

That will be all.

Re: NOTHING is EVER Easy.
 

someone just hit your dog with a del sol

Re: NOTHING is EVER Easy.
 

Doesn't sound like a huge issue.

Re: NOTHING is EVER Easy.
 

Oh ----!

Noooooes!!

Damn Del Sol's

Re: NOTHING is EVER Easy.
 

One machine shop told me they would not be able to get it out, I goto get a second opinion in the morning. Here is hoping...

Re: NOTHING is EVER Easy.
 

grind the spot flat and then drill it again with a very small sharp bit and SLOWLY go in and SLOWLY get BIGER

Re: NOTHING is EVER Easy.
 

You still have home made experience to earn. If I had a broken bolt in my pee hole it wouldn't be ----. Improvise

Re: NOTHING is EVER Easy.
 

I'm a MEXI-CAN! O0

Re: NOTHING is EVER Easy.
 

STOP BEING SO LAZY AND GO STEAL ANOTHER ENGINE

Re: NOTHING is EVER Easy.
 

------- t 'eeeves'!

Re: NOTHING is EVER Easy.
 

Re: NOTHING is EVER Easy.
 

dude, broken bolts suck..

Re: NOTHING is EVER Easy.
 

Remember kids, broken nuts are worse than broken bolts!

Re: NOTHING is EVER Easy.
 

buy a good drill bit and drill that ---- out. cheap drill bit won`t work, get the good ones

Re: NOTHING is EVER Easy.
 

They Spinnin' Niggah They Spinnin'!!

Re: NOTHING is EVER Easy.
 

It's worse than that, holmes, a white man's been ------- your girl. :(

Go to a Grainger or tool supply or machinist supply and buy a "center drill." It's a short stubby fat bit with a tiny nubbin of a drill bit coming off of it... center drills *do not* flex or let the bit wander. This will make it very easy to drill the broken bolt/bit out with a drill press, or very very very steady hands, or you can make a thin jig out of plywood like us trailerpark rednecks.

Be glad it's a broken drill bit and not a broken EZ-out. EZ-outs are made out of something ten times harder than any drill bit. You spend 4-5 drills on a broken one to get it drilled out + removed.

Re: NOTHING is EVER Easy.
 

FWIW, try to get a left handed center drill. It might remove the bolt/bit while you're drilling, saving you work.

Also, remember, lube is your friend. WD40 or ATF, if it starts smoking it's too hot and you're dulling the bit.