Noob projects & pics
24 Attachment(s)
Well I've been coming to this site for a while, pretty much just researching for my project, but figured I'd show you all what I've accomplished thanks to help from HMT 8)
My latest project is a 89 SI. Bought it from the original owners, ran and I drove it for a while before deciding that I was tired of being slow. So I decided to go ls/vtec, just to try it. I've owned gsr and b16 hatches, but thought why not give this a shot. So I bought a complete B18B1 out of a 98 ls for $300, then bought a complete B18C1 that had a spun bearing, for $250 (kid was a retard, didn't have a clue what the head alone was worth) I freshened up the bottom end, put in a Golden Eagle block guard, Cometic Head gasket, changed the oil pump and water pump, new timing belt and all that crap. I also didn't want to have to ---- with the intake butter flies, so I removed them and tapped and plugged both ends of the plate, put some new gaskets in and put the intake back together. I bought a B17 tranny and a set of mounts from a buddy of mine, bought a new 6 puck, new axles, and made some linkages, and went to town. Attachment 23504Attachment 23505 Attachment 23506Attachment 23507 Attachment 23508 Attachment 23509 Attachment 23510Attachment 23511 I knew that I was going to turbo this car at some point, so I bought a RYWIRE conversion harness, and converted it to obd1. I had my buddy throw in a chip kit in a P28 and burn a map off of crome pro. The car ran great, pulled hard ass hell. Out of all the vtec cars I've owned, the vtec in this hit the hardest. Needless to say, the day finally came when this ---- got boosted. After getting my ass handed to me by a cobra (I later found out he's running 14psi) I decided it was time for boost. The turbo is a changy t3/t4, running an oil restrictor (have 3k and no shaft play or smoke, but we'll see how long she lasts :6) cast mani, RS Type BOV, 7 psi spring, and some DSM 450's Attachment 23512Attachment 23513Attachment 23514 Attachment 23515Attachment 23516Attachment 23517 Attachment 23518 Attachment 23519Attachment 23520Attachment 23521 I bought a 2.5" mandrel intercooler piping kit as well as a 2.5" mandrel exhaust kit from Racing solutions and did the DIY intake and exhaust. A little example of the mad welding skills. Or as well as can be done with a 110 mig. 8). Also sporting the improvised windshield washer reservoir. :y Attachment 23522 My Buddy messing with the new tuning stuff we just got from Xenocron. After a couple hours and a half tank of gas later, she runs like a raped ape and idles as smooth as a new car. Just a few other projects: Attachment 23523Attachment 23524Attachment 23525Attachment 23526Attachment 23527 We got a little drunk and started putting H22's in everything :S I'll get some more pics and porn on here in the morning. It's 3:17am and I gotta work in 7 hours :X |
Re: Noob projects & pics
Grade A from the bottom of my heart. :'(
|
Re: Noob projects & pics
WHERES THE PORN FAGGOT?
WELCOME TO HMT! |
Re: Noob projects & pics
Clean setup man!
Where did you get a 110 migger from? Need one for my place and what did it run you? Thanks. |
Re: Noob projects & pics
Quality work. Welcome.
|
Re: Noob projects & pics
yeah, ------ finally a noob that doesnt ask stupid first 200 post questions, and actually shows that there's potential.
|
Re: Noob projects & pics
Wow nice clean little hatch anda nice seup.Good job newb i like O0
|
Re: Noob projects & pics
Awesome :)
|
Re: Noob projects & pics
I'm diggin that white rex! That cast mani looks clean and fool proof.
|
Re: Noob projects & pics
Solid head on your shoulders. Your oil feedline is either cross threaded sideways, or you're trying to fool us that it's installed. Either way, I forgive you.
|
All times are GMT -5. The time now is 01:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands