newb here thought I'd share some of my current project pics
 

So between work, my daughter, and everything else I've been trying to finish a couple of projects that have been on going for WAY TOO ------- LONG!!! I've been building the crx for 5 years. And the civic is a Cali shell(really clean minus the doors) so I b swapped it and will probably boost it as well. The civic used to have a boosted 1st gen integra motor in it. I just came up on another b swap that I couldn't pass on. It runs and drives finally after almost a year of tinkering with it. I still have to do a wire tuck on it, change out the fuel lines, etc and then it's getting torn down to restore it over the winter. Hopefully the rex will be drag strip ready next spring also. There's tons of stuff not in the pics for the rex. I just want to finish all of the fab before I start assembling it again. Cage is all chromoly. basically 8 pt with drivers door x and full halo. traction bars. I tubed from the strut towers down to the frame fronts. If I'd gone through the fire wall at the time it would put me into the hotrod class that I def don't have the power for. Now the rules are a little diff though I believe.
So anyway just thought I'd share. And I'll share the progress also. Hopefully be able to post a vid of a nasty burnout or 2 from out front of my house when its done also!!!!!
http://i45.photobucket.com/albums/f7...rxwheel008.jpg
http://i45.photobucket.com/albums/f7...rxwheel009.jpg
http://i45.photobucket.com/albums/f7...rxwheel011.jpg
http://i45.photobucket.com/albums/f7...rxwheel010.jpg
http://i45.photobucket.com/albums/f7...rxwheel006.jpg
http://i45.photobucket.com/albums/f7...rxwheel005.jpg
http://i45.photobucket.com/albums/f7...rxwheel002.jpg
Yeah I know a wiring ------- nightmare!!! I built the full harness from bits of others and new wiring. Never again. So thats me actually showing some patience in a place I don't like to be.

Re: newb here thought I'd share some of my current project pics
 

another fellow CRX lover O0

Re: newb here thought I'd share some of my current project pics
 

good job on doing it yourself



if you post some porn, us og's will welcome you better.

in fact, most will treat you like ---- until you do post some porn

welcome to HMT

Re: newb here thought I'd share some of my current project pics
 

good call faggot everyone loves Crx's


Nice projects And welcome to the baddest site alive

Re: newb here thought I'd share some of my current project pics
 

im not sure whats more hardcore american, your sleeveless shirt or the flames going down the side of the car ^-^

Re: newb here thought I'd share some of my current project pics
 

CRX.

Wait this isn't a poll.

Re: newb here thought I'd share some of my current project pics
 

I was thinking..holy wire batman. But it's badass that you nignog'd a wire harness up with extras. Get rid of those chrome flames please.

Re: newb here thought I'd share some of my current project pics
 

I think the flaming for you wont be bad because of that badass attempt to undergo the nightmare of making your own wiring harness. +1 and some porn will make you untouchable in a sense for when it comes to newbs.

Re: newb here thought I'd share some of my current project pics
 

yea i cant wait to see that wiring all done

Re: newb here thought I'd share some of my current project pics
 

Yes but after seeing the wife beater, tattoo'd muscles guy, I vote... HHH.

Re: newb here thought I'd share some of my current project pics
 

damn, 5 years........ :o......better get that ---- done O0

dont forget the porn

Re: newb here thought I'd share some of my current project pics
 

you need any parts for the black car?

Beau

Re: newb here thought I'd share some of my current project pics
 

----!, sorry, most forums Ive been to, crx's werent very popular. haha. but I have noticed this forum there are quite a few. heres something to get your mind off my mistake.

Attachment 23667

Re: newb here thought I'd share some of my current project pics
 

WOW!! Haters. Sorry I was busy working on the 9th fastest allmotor crx in the world for a couple of years there so I didnt exactly have time to work on every project at once. ;D

The tribal designs down the sides of the crx were put on there by a guy that did a really ---- job spraying this car. I did all of the body work and he was supossed to finish a little of it and paimt it ford flat black. So I went to pick it up and it had his company logo on the front clip hood area and it wasn't the color it was supposed to be. It also had those gay tribal flames on the sides in which they pin stripped( with a brush ) around the tribal. So I removed all of it from the front clip and still haven't gotten to that. I'll post some newer pics some time soon.

BLACKSI what are you selling that I could use??? I could use a nice exmani, but I'll probably build one this winter for my ching chang ping pang turbo. LMK though.

http://i45.photobucket.com/albums/f72/camsshaft/11.jpg

Re: newb here thought I'd share some of my current project pics
 

whatervers the lightest is how we roll well me anyway

Re: newb here thought I'd share some of my current project pics
 

all lexan rear hatch
one piece front end
gutted doors with lexan windows
think i selling my exhaust manifold
home made staging brake handle and master
bunch of other ---- just think of any crap you might need

Re: newb here thought I'd share some of my current project pics
 

I already have all of the body stuff. Might be interrested in the staging brake w/master and mani. lmk what you have to have and send me some pics if u can. tahnks

Re: newb here thought I'd share some of my current project pics
 

is that an 87 or lower model? the console looks a little different than mine.. just wondering..

Re: newb here thought I'd share some of my current project pics
 

no. look at the edge of the door in the first pic

Re: newb here thought I'd share some of my current project pics
 

90crx and a 86civic hatch