New flat black hotcoat! Watcha think?
I just talked a local shop into trying this stuff and here are the results...
http://www.newbieforces.com/files/4g64.JPG IF you look on the flange it looks like it is scratched but that is aluminum off of the key I tried to scratch it with. Manifold is for a 4g63/4g64 It adds about $60 to the price of a manifold and it is good for 1800 degrees. |
Re:New flat black hotcoat! Watcha think?
that manifold looks good (like with the heat coating) and the welds are ok too...
but being close to equal length... not really working out there.. would this cause any problem with the 1 cylinder having more pipe than the others? |
Re:New flat black hotcoat! Watcha think?
Originally Posted by rollmodel
that manifold looks good (like with the heat coating) and the welds are ok too...
but being close to equal length... not really working out there.. would this cause any problem with the 1 cylinder having more pipe than the others? |
Re:New flat black hotcoat! Watcha think?
what type of heat coating is it? is it painted... or powdercoated...
i think it is a good idea. but even a better one might be to use heat wrap on the manifold (unless they are worried about looks). |
Re:New flat black hotcoat! Watcha think?
nice... how much do you charge for them there manifolds?
|
Re:New flat black hotcoat! Watcha think?
How many minutes is that paint gauranteed to stay on after you start up the car?
|
Re:New flat black hotcoat! Watcha think?
Originally Posted by rollmodel
what type of heat coating is it? is it painted... or powdercoated...
i think it is a good idea. but even a better one might be to use heat wrap on the manifold (unless they are worried about looks). |
Re:New flat black hotcoat! Watcha think?
Originally Posted by AgentMurdoc
nice... how much do you charge for them there manifolds?
|
Re:New flat black hotcoat! Watcha think?
Originally Posted by Shockazooloo
How many minutes is that paint gauranteed to stay on after you start up the car?
|
Re:New flat black hotcoat! Watcha think?
i painted my manifold with some 1200 krylon.... that was like 4 bucks...
4 bucks.. or 60... 4 or 60.... come on hmt ;) i would have to buy more than 10 paint cans (which is like painting it at least 80 times, because its not a big manifold). if that stuff helps keep in the heat.. cool.. but for looks.. i like the 'krylon touch' |
Re:New flat black hotcoat! Watcha think?
Originally Posted by rollmodel
i painted my manifold with some 1200 krylon.... that was like 4 bucks...
4 bucks.. or 60... 4 or 60.... come on hmt ;) i would have to buy more than 10 paint cans (which is like painting it at least 80 times, because its not a big manifold). if that stuff helps keep in the heat.. cool.. but for looks.. i like the 'krylon touch' It won't come off of your Muffler, Charge pipes, intercooler, or whatever. I didn't say, "Hey look at this and buy it" Just showin' something I am doing now and thought someone would think it was cool. :'( I'm such a looser. |
Re:New flat black hotcoat! Watcha think?
Originally Posted by typert
Just showin' something I am doing now and thought someone would think it was cool. :'( I'm such a looser.
|
Re:New flat black hotcoat! Watcha think?
i've got 1500 deg paint on the header on my car. it's holding up just fine, 2 months now. trust me, it's gotten plenty hot. It's all in the prep. we used paint stripper on it (it had crappy flat black normal paint), then degreased it, cleaned it, dried it, then painted thin coats.
also, if you read the spray can it says u have to cure it in an oven, most people dont im sure and just fire up the car and beat on it. Mine did smell funny for a day or two, but the stink is gone but the paint remains. |
Re:New flat black hotcoat! Watcha think?
I got some of that por15 or por20 stuff (expensive) and coated my HF manifold and it hasn't flaked, chipped, burned or even changed colors for over 1000 miles whatsoever.. It's the best.
|
Re:New flat black hotcoat! Watcha think?
im still a fan of stainless...
and if you have shitty welds...there is always heat wrap |
Re:New flat black hotcoat! Watcha think?
this is the stuff i used on my manifold. been on it now for 4 months. it smoked the first time i drove the car but then it didn't smoke no more and looks good.
http://www.jcwhitney.com/autoparts/P...1/p-35/c-10101 |
Re:New flat black hotcoat! Watcha think?
that manifold looks way clean btw. post pics of the build up ;D
|
All times are GMT -5. The time now is 04:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands