need tips to get more fuel to my boosted d16y8 (the cheap way)
I got a d16y8 in my acura el..im running a ported and polished head with stock cam and stock bottom end with a 1jz supra turbo at 8 psi...I built the adapter for the manifold myself and built a down pipe and im currently using a vw passat intercooler with 2 1/2 piping for intake and 2 1/2 exhaust...it keeps throwing amap sensor code at high boost,( 6 psi or so)..I tryed tricking the map by running a vacuum line to the map with a T in the line withe a check valve on theend of the t so the map will read at vacuum and then when it gets boost it blows out the check valve,,,, which helped a lot...I can actually let it bounce off revlimit 5 or 6 times before throwin map code....before I could only hit rev limit once...any other tips on tricking my map sensor? And any tips on how to get more fuel? I already unplugged my intake air temp sensor so its reading -40c.....any other suggestions? Iwanna build this cheap as possible to make a point to the boys at work lol
|
Bigger injectors and a good tune that changes the MAP sensor settings.
|
Yaa im lookin for some h22a1 injectors,,, they are 345cc compared to my 240cc..I got no way of tuning it yet tho..im getting hondata s300 in 6 months or so but I wanna be able to run it till then...I havent hit the road with it yet,, I got 100 kms on it drivin aroung my shop and it seems to work great..im hittin between 8 n 10 psi in 2nd roastin the tires,,, im just worried bout it running too lean when I hit the highway or throwin the map sensor code at high speed n her fall flat on her face lol
|
You won't get anywhere without a proper tune. Also, there is a chance your stock MAP can read some boost (mine does, went to 0.4 bar with it) but you'll need proper ECU management. At least try a piggyback and check your AFR, you might not sense anything but it could run very lean under boost and then its a shame about the engine.
|
All times are GMT -5. The time now is 11:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands