HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   need help identifying a motherboard (https://www.homemadeturbo.com/general-discussion-6/need-help-identifying-motherboard-98994/)

Smith-02 01-20-2009 02:47 AM

need help identifying a motherboard
 
im drunk and searching fails me.

http://i16.tinypic.com/33tl28j.jpg

its for a friend, they need audio drivers and i dont know how to find that ---- drunk ^-^ O0

AgentMurdoc 01-20-2009 09:55 AM

Re: need help identifying a motherboard
 
yup... that's a motherboard alright :P

Jorsher 01-20-2009 10:09 AM

Re: need help identifying a motherboard
 
Sorry, but I don't think the geekiest of geeks will be able to figure out what that is.

You'll either need a high res shot, or to look around the board for the brand/model.

TBH, I've never seen a mobo without the model wrote on it, so it's either extremely cheap or you aren't looking hard enough.

Also, the chips should have models/brands on them. One will be an audio chip. Follow the traces from the audio out to a chip, and read what brand/model it is, then find drivers.

Realtek is a common one.

tekno9998 01-20-2009 01:35 PM

Re: need help identifying a motherboard
 
run this program and look at mainboard bam http://www.softpedia.com/get/System/...fo/CPU-Z.shtml

Tom-Guy 01-20-2009 02:02 PM

Re: need help identifying a motherboard
 
I told ------- Tough-gay to get a better ------- picture, he fails.

turbostd 01-20-2009 02:09 PM

Re: need help identifying a motherboard
 
Looks to be an asus board with an intel chipset of some type. It may be an OEM board is it out of a hp or compaq? Asus makes some of their mobos. You could always try to install the generic ac97 sound drivers.

Jorsher 01-20-2009 02:09 PM

Re: need help identifying a motherboard
 

Originally Posted by Joseph Davis
I told ------- Tough-gay to get a better ------- picture, he fails.

hahahahha, yeah, i have faith he'll get it running...

forgot about cpu-z, it's a good tool :)

McBoost 01-20-2009 04:03 PM

Re: need help identifying a motherboard
 

Originally Posted by turbostd
Looks to be an asus board with an intel chipset of some type. It may be an OEM board is it out of a hp or compaq? Asus makes some of their mobos. You could always try to install the generic ac97 sound drivers.

+1 on the Asus board. Try a handful of their most common audio drivers.

A couple things that may be helpful:

Intel chipset
Looks like an AGP vid slot
Looks like it can take both DDR or SDR RAM
May have SATA capabilities... (hard to tell what the 2 small slots are to the right of the primary IDE channel)

Looks similar to the Asus P4C800 Deluxe 478 mobo... find those drivers, they'll probably work.

tekno9998 01-20-2009 04:30 PM

Re: need help identifying a motherboard
 
or just use cpu z and remove the doubt morons it well tell you the exact mobo and revision nb and sb

Smith-02 01-20-2009 05:35 PM

Re: need help identifying a motherboard
 
it's a DFI (diamond flower inc)


All times are GMT -5. The time now is 12:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands