Sinner

I'm about to bring the TullosTech EBCs back, but in kit form only. Also, I'm thinking about making the software open source so any nig nog can modify it. The major hold back is the solenoids I'm using cost too much. I'm hoping to sell the kit total kit under $100; if I can find a good source of cheap solenoids. Currently, I believe the GM solenoids are $30 which includes the solenoid plug. I would rather be in the 10-15 range for boost solenoids. Please let me know if you know of any place that sells 12v pneumatic solenoids for cheap! So far I ran the prototype of this version for 8 months without a single problem, but I'll need a few testers also if this product goes to production.

E-b0la

http://www.fremontindustrialsupply.c...d-valve/Detail

$12.54, 2way valve

Is that what you need?

HomeMadeTurboz

JY, in almost any dodge product, turbo or non. Can even grab them with a pig tail. Cheap too like $1 if you pay for it.

Looks like the one on the right but all the nipples are in a row on the top. Found under the hood, on all sorts of Dodge / Chrysler products: Mini vans, lebarons, k cars, dynastys, ect...

I use those, and a hobbs 83299, or 83329 adjustable pressure switch and bam a $15 adjustable EBC.

E-b0la

That's cool and all, but I think he's looking for new stuff. Not junkyard crap. It might work fine, but would you want to put those in a kit your selling?

Tom-Guy

Humphrey three ten or four ten 3 way valves will run under thirty after you buy the eighth NTP to barb fittings They like a lower duty cycle try twenty Hz any other Qs hit my email and link me to threads I dont get online much these days

HomeMadeTurboz

The dodge ones are all black plastic, most of them that you find, you would never know if they were new or not. That pic was just the closest thing I could find that looked similar. Clip the wires back aways and you have a good pig tail to work with too, but if new is what you desire, then this will not help you out.