davcivic

What's the name on this sensor. I'm missing it from this IM and I want to sell it but I also want to be able to tell the buyer what they need.



[img width=600 height=400]http://www.newbieforces.com/files/IMG_0086.JPG[/img]

Thanks


Oh and if you want to know, it's from a 95 SOHC Vtec ZC, kinda like a Z6, but with a little more power

98ctr

TPS throttle position sendor. its the one on the throttle body not on the manifold its self, right. 98ctr

ekhatchback99

Yeah..It looks like the TPS.

davcivic

Yes, that's what I thought.

Thank you much!!!

SkunT

TPS and make sure you set that bitch back right or you will hate yourself.

y49crxsi

Well, ----, my tps is rivited in there, looks like soemone didnt want the whole throttle body. Its probably gonna need to be tapped to be bolt back on, then set right, .5 at closed throttle, 4.5 at open, i think.....

shortyz

yeah to replace that u have to drill the rivets and tap new holes and bolt a new one in.

Sinner

a better way is not to drill it out, but to take a dremmel and turn the rivet into a screw by pulling a line directly through the middle. I've done this many times. workes great!

like they said above get out your multimeter and check the voltage on the TPS when you install it.

Nick

98ctr

the holes are allready taped, just find the right screws. I belive they are 1/4 28. Or some shiet like that. Just take the tb to the hardware store and find the right screws. 98ctr

88crxSi

or take the TPS OEM screw/rivits and find a matching nut, then find a matching screw. (if your TB is still on the IM).