|
My setup and dyno sheets
|
Re: My setup and dyno sheets
looks like you laid down some serious numbers. Whats the spec's on motor and the kit?
|
Re: My setup and dyno sheets
maybe you should resize thos dyno sheets
nice numbers though |
Re: My setup and dyno sheets
Originally Posted by BLACKSI
maybe you should resize thos dyno sheets
nice numbers though |
Re: My setup and dyno sheets
Sorry i didn't realize they'd come out that big.
Specs B16 Golden Eagle sleeves 84mm bore Endyn rollerwave pistons Eagle rods Block 0 decked Stock Crank Cometic HP series headgasket Ported and polished head Combustion chambers cut to match the bore 84mm "Quench Pads" Endyn .5mm oversize valves Crower dual springs and titanium retainers Crower stage 2 turbo cams AEM cam gears Edelbrock intake manifold AEM fuel pressure regulator , Fuel rail and fuel filter RC 900cc injectors Bosch fuel pump external HKS BOV Tial 44mm wastegate Garret GT35R BB turbo Turbo performance manifold custom 3" downpipe and exhaust Greddy intercooler All pipes custom made all custom fuel lines etc... AEM EMS AEM wideband 02 Tuned by WadZii on the AEM forum |
Re: My setup and dyno sheets
nice numbers, and nice boost creep. :o lol.
|
Re: My setup and dyno sheets
your setup is way not getto enough.. lol.. j/k.. good numbers welcome to the board
|
Re: My setup and dyno sheets
I threw the deltacreep out for the Tial to get everything in check.
|
Re: My setup and dyno sheets
Belive me there is some ghetto stuff about the setup especially the lowes homemade water line kit for the turbo. Exhaust is ghetto dumps out right behind the seats with a 45 degree turndown on it . Other than that stuff it's a well build motor.
|
Re: My setup and dyno sheets
Originally Posted by gourd
Other than that stuff it's a well build motor.
|
Re: My setup and dyno sheets
[img wdith=700 height=500]http:// YOUR LINK HERE[/img] :D
|
Re: My setup and dyno sheets
thats a pretty sexy set-up you have there.
ghetto is good. any more pics of the car... |
Re: My setup and dyno sheets
niiice 8)
|
Re: My setup and dyno sheets
Very nice numbers and setup ;D
|
Re: My setup and dyno sheets
look at that bitches, rockin the ss autochrome manifold and making over 400hp, whatchall be knowin?
|
Re: My setup and dyno sheets
Originally Posted by gourd
Turbo performance manifold
|
Re: My setup and dyno sheets
ssautograp mani mated to a gt35r? blasphemous
|
Re: My setup and dyno sheets
I got cheap on the manifold and wastegate. The Tial 44mm is on the way and as soon as i get more $ a lovefab mini-me manfold is going on and a coil on plug conversion as you can tell in the second dyno sheet the ignition broke up real bad. the 604hp run on the dyno was done right off a street tune. After that pull the ignition would not hold up anymore.
|
Re: My setup and dyno sheets
how much psi where you runnin on both? get any 1/4 times yet?
|
Re: My setup and dyno sheets
the 604 was at 26psi and the other one where the ignition broke up the boost spiked to 34psi. LOL. On all the runs as soon as the boost came in the tires exploded on the dyno so i'm waiting the guy that tuned is gonna come back and i'm gonna use a dynapack this time and see what it really does
|
Re: My setup and dyno sheets
wow very impressive indeed 8)
|
Re: My setup and dyno sheets
Anyone else on this forum from ohio? just checking
|
Re: My setup and dyno sheets
lots of guys from ohio.....where at in ohio are you? Im in youngstown :-\
|
Re: My setup and dyno sheets
I'm in the canton area
|
Re: My setup and dyno sheets
toledo.. and sandusky (at least for next week)
|
Re: My setup and dyno sheets
hahaha owned , turbo performance manifold
|
Re: My setup and dyno sheets
neer dayton here
|
Re: My setup and dyno sheets
Originally Posted by gourd
I'm in the canton area
|
Re: My setup and dyno sheets
i'm like 15min south of the mall in bolivar. What seth are you thinking of? ???
|
| All times are GMT -5. The time now is 10:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands