My resistor box delete
 

I had to make this Monday to get my 91 Si to run with saturated injectors. If anyone would like to copy it, I'd be glad to take royalties :6

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

Re: My resistor box delete
 

Thats hot. Is it possible to just weld all the wires into a soild ball fo solder?

Re: My resistor box delete
 

I thought about that, but this way, I can just remove the delete so I can use my peak and hold injectors again some day. And it was hard enough to get the solder to stay on the delete.

Re: My resistor box delete
 

that solder doesn't look like its actually sticking to the "wires" therefore when they vibrate, they could come in and out of contact and give you very wierd and hard to diagnose drivability issues.

Re: My resistor box delete
 

I dont think solder will stick to cotter pins to well :1

Re: My resistor box delete
 

u need a welder for that ----

usually bigger injectors require the resistors
what kind of injectors are you running?

Re: My resistor box delete
 

i actually made this same thing to plug in when i unplug my resistorbox each year when i go for emissions and have to change back to stock injectors. non-stranded copper wire and solder does the trick.

Re: My resistor box delete
 

not sure what he gots but i have 750 high saturated injectors. unless you need bigger then that saturated will git er done.

Re: My resistor box delete
 

LOL, awesome job. Just tape it up so it doesn't arc over, eh?

I'd hit that mess with a larger wattage soldering gun, too. You're probably fine for the short term, but the sodler hasn't adhered very well there.

Re: My resistor box delete
 

yea, I know teh solder isnt sticking to the cotter pins to well. And welding it is NOT an option. it will just blow the cotter pins away :1 I got it taped upnice and tight. Solder is touching every pin and surrounding them, so I think it will be ok, but if I have runnign issues, I'll fix it better. If I had the resources, I'd make a custom plug of somesort that looked even cleaner.

oh yea, they are stock 94 integra injectors.