My car is reborn... kinda
 

So after the carnage of hitting a 100lb dog going 60mph, I finally replaced the radiator support, straightened the front frame rail with a sledge hammer, and put on the new fenders and bumper cover. I still need the metal bumper itself, and the car needs to be painted. I also replaced my clutch with a six puck sprung clutch and my flywheel with an 11lb one from lsd while it was off the road. The clutch swap was a friggen nightmare, and my advice is that if you have an engine hoist or lift when replacing the clutch, just pull the whole engine and make life easier for yourself. but thanks to LSD for a sweet clutch, still getting used to it, my old one was worn down to the rivets.

ANYWAY, I broke something and I need one of you part -----s to help me out. I over-torqued the bracket before the tranny was on all the way, its on the bottom of the engine behind the oil pan that connects the back of the engine block to the bottom of the tranny. It is a approx. 1inch square aluminum bracket sort of "L" shaped connected to the engine by 2 or 3 14mm bolts and to the tranny with a 17mm bolt I think. Oh its from a b18b. Help me out nignogs. I'd post pictures but I've downgraded to 56k for the summer and can't tie up my phone line for 6 hours. oh yeah, my POS greddy 18g internal wastegate isn't working, any ideas? Limitless boost is fun, but kind of horrifying

Re: My car is reborn... kinda
 

pics.... :y

Re: My car is reborn... kinda
 

---- watsegates, and the bracket is useless. I dont have one, many tohers do not eaither.

Re: My car is reborn... kinda
 

i think the black fenders and hood give the car a sexy look as well as the blown out rear window, replaced with clear pastic and covered with duct tape art. :y

Re: My car is reborn... kinda
 

dropping a tranny is ------ cake, haha good job though

Re: My car is reborn... kinda
 

changing a clutch takes like 45 minnutes..... :P

Re: My car is reborn... kinda
 

how do YOU change a clutch?? explain how to take an engine/trans out in less than 45 minits please :y

Re: My car is reborn... kinda
 

Took me 5 hours to swap out my clutch by myself, got it disassembled and out fine, getting the trans shaft to line back up was the ------- hard part, ------- thing dropped on my chest a few times. Having a hand woulda been marvelous

Oh, and the pic dont work

Re: My car is reborn... kinda
 

My friend bought those for his y8 at honda. They weren't too much, I can't remember what's they're listed as. I'd call them and see if the parts guy can figure it out. It's listed in a wierd section. I'll ask him later how much he payed.


For those of you that can swap a clutch in < an hour. If you're anywhere near Miami I've got $100 for an hour's worth of work...

Re: My car is reborn... kinda
 

Hey, if you ARE looking for that bracket, I have both front and rear from from my B18B. Let me know if your shoppin em. Reading comprehension owns me.