muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

So i thought my ECU was fucked cause i would rev it and it would cut off at about 3,500 RPM's. Then i find out that its just the LAunch control. I also had a problem with the ECU not being grounded well. SO i fix all those little problems and take it for a spin. I hit like 6 psi in 1st and 10 in second gear. It felt goooood! Now all i have to do is slap on a MBC so i dont go over and ---- something up!

Thanks to all that have helped me out with my ghetto 4 door. It had been a long journey and a learning experience for me. I would have never done this if it were not for the people here.

Now here is a list of people i would like to thank

oh and Trvis too...cause he's a canuck!

and all the others i might have forgotten ...

thanks alot and i'll see when i get time to do the hatch too!!!!!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

glad to hear it julio!! youll never go back to 6psi again!!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

Post a pic of the car. Your far from done, son. lol ;D

Now go to the drags damn it. ;)

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

woo woo, I got thanked and I didn't do anything but ride in the car when it was NA. don't get too cocky with boost, you wouldn't want to blow that motor and be obligated to throw a fully built d in there.

I hoped to be making a message similar to this by the end of september, but all the little ---- is getting in my way from finishing my project. things I still need: coolant/oil lines, tt block fitting, install electronic water pump, finish charge pipes, finish manifold, build water injection controller, chip obd1 ecu, swap dizzys, burn chip, install 3bar, install 690cc injectors, finish dp, hook up all vacuum lines, hook up gauges rape that bitch 'til it explodes.

it's just a bunch of little ----.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

nice, now im waiting for the link where you show pics of your engine all over the ground ;)

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

that`s great but don`t go too far on boost mang

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

w0ot...now where are the pics ;D

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

So true, it seems to never be enough. Enjoy the boost,you'll get use to it soon. ;D

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

you're never done :P i was running 6 psi for a long time, then i got a mbc and raised it to 10, 6 felt like stock then, now i'm at 13, i can't really push the stock engine too much more, so next up is building the b18 block that i have, YOU ALWAYS WANT MORE!!!!!!!!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

whats your se-up again julio?

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

Post pics!!
projekteg is a liar, he's only pushing 12psi. :P

Stan

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

actually 14, since i took my exhaust off, i was only hitting 12 psi on the dyno for some reason, i think maybe there's less load on the car on the dyno, i don't know ???

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

Im sure i'll try to want to push more LBS of boost but i think ill stay on the safe side and keep it under 10!

My set up is a T-bird turbo with ghetto ass charge pipes, Mazda MX6 IC, GHetto _D down pipe, Turbo edit ( chevy's basemap ) , 10 psi , stok bottom end all on a beautiful DOHC ZC.

ill try to get footage and pics soon!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

congrats dude... now go take out some muscle cars that wouldn't expect it from little honda's. ur setups cool but im surprised ur ic pipes don't pop off at 10psi... mine aint even "that" ghetto and i pop pipes at 8psi...

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

its ghetto fabluous!!! You seem a bit ghetto to..are you from national city? :P

IM not ghetto though i'm keeping it REAL!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

near there... but im not ghetto? my setup is but whatever works =x imma redo everything... gonna take it all off like next week.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

foolio, do i get a thank you too ?

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

yes you do travis..for giving me a colorful B-day greeting!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

lmao, you rememeber. i better get one for my birthday.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

when you turn 9 we'll all give you a nice birthday greeting.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

I thought he turned 9 last year? ???
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

when you have 18 kids of you're own you'll be forgetting their ages too.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

Its about time you joined the party!

WHERE THE ---- YOU BEEN?

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

ay si, doc's internet didn't work because he didn't pay the bill. he needs to reevaluate his life, he still had water and electricity but he had no hmt.

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

i know HUH! you memmer? memmer? you memmer!

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

---- the cable company. I pay it 1.5 months late every month. They decided to get lippy with me this time and shut my god damn internet off. No warning, no phone call, nothing. ---- them in the goat ass.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:muthafucking thank you HMT!!!!!! 10 psi today on TE!!!
 

nice Julio..now get that bitch tuned and then turn it up more ;D