mattnteclipse

IM missing a bolt that holds the driver side motor mount to the engine in my 91 hatch. Anyone happen to know the thread pitch, length and such. I ask cause the cars half and hour away from me and an hour away from a lowes or any hardware store and it suck to grab the wrong thing. thated be a big turb in my cereal.

95RedEX

Grab one from a dealership... Can't be that much...

USS

Well, it's for sure a grade 8 bolt. You'll need something strone. It's probably a metric thread, and if that is the case, good luck finding one. I would guess like 3/8 fine thread?

projekteg

lol, "hey, you guys got any '3/8mm fine thread' bolts here?"

USS

Haha, I read that and it didn't make any sense. I would try a 3/8 fine thread bolt though, otherwise finding a grade 8 metric bolt will be hard as hell.

jinxy

probebly like m12 1.00 pitch. thats for toyotas but maybe its close :P

projekteg

finding a grade 8 metric bolt won't be any easier than finding a standard bolt that fits a metric thread correctly my advice is to get one at a junk yard or from honda. i wouldn't use some off the shelf misc. bolt from the hardware store, but if you're talking about the bolt that goes through the mount, it should be an m17, not sure about the pitch though.

rsmith2786

Grade 8 SAE is grade 10.9 Metric. Im sure you need a grade 10.9 bolt here. My local hardware store has all the metric sizes i need in grade 10.9. Just take a run and find what you need. I think its a 1.25 thread.

playboyace35

get it from the dealership, everythin else will snap.