metal in engine = bad, lots of pictures.
 

here is my new car, 1991 integra ls, 1.8l DOHC b18a1.
dirt that looks like its on car is acually my scanner before i cleaned it.
http://www.crpud.net/~jbliss/pics/integra_side_1.jpg
http://www.crpud.net/~jbliss/pics/integra_side_2.jpg
http://www.crpud.net/~jbliss/pics/integra_inside.jpg
http://www.crpud.net/~jbliss/pics/integra_front.jpg

all needed to do was take the head & intake manifold off.

http://www.crpud.net/~jbliss/pics/integra_head-on.jpg
http://www.crpud.net/~jbliss/pics/integra_head-off.jpg

as you can see in this picture, the pistons look ok.
you can't see the little doinks in them, there is only a couple and they're small

http://www.crpud.net/~jbliss/pics/in...ck-pistons.jpg

i was still angry because they have little doinks in them from the peice of aluminum that got in there.

http://www.crpud.net/~jbliss/pics/integra_angry.jpg

here is the head, it needs a valve grind, hopefully NOT any new valves cause they're so damn expensive. you really can't see them but it has some doinks in that are a little smaller than a .177 caliber bb.

http://www.crpud.net/~jbliss/pics/integra_head_1.jpg
http://www.crpud.net/~jbliss/pics/integra_head_2.jpg

and here is a bunch of other misc bullshit cause there wasn't any point of taking a roll of film half full to get developed.


my make shift bench
http://www.crpud.net/~jbliss/pics/in...hift-bench.jpg

intake manifold i cleaned pretty good.
http://www.crpud.net/~jbliss/pics/in...e-manifold.jpg

my toolbox, crafstman stuff. (i broke two 14mm sockets trying to get the head bolts off, one 1/2 drive and one 3/8 drive)
http://www.crpud.net/~jbliss/pics/integra_tool-box.jpg

my worthless dog trying to help
http://www.crpud.net/~jbliss/pics/in...thless-dog.jpg

pushrod power.
http://www.crpud.net/~jbliss/pics/in...hrod-power.jpg

Re:metal in engine = bad, lots of pictures.
 

Well, for being a hick-shifter you sure are gettin' into that jap ----. :D Thanks for the pics though :)

Re:metal in engine = bad, lots of pictures.
 

How much did you pick that up for? My buddy has the same car with the same interior. I would like to pick one of those up to toy with.

And OMG get that ---- off the hood of that SS!!!!! :o
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:metal in engine = bad, lots of pictures.
 

the car was acually given to me, but i one with around 70k miles is probably worth about 3000-4000 dollars.

thats just an old door sitting across the body, the hood in one the roof of the car :P

what is a hick shifter?

Re:metal in engine = bad, lots of pictures.
 

Given to you??? :o Lucky bastard......
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:metal in engine = bad, lots of pictures.
 

Nice workbench.. where can I get one of those cheap?

Re:metal in engine = bad, lots of pictures.
 

u want an integra to play with?? buy mine! ive got a 91 GS with 115k on it for sale. e-mail me if ur interested.


Brett

Re:metal in engine = bad, lots of pictures.
 

Are you willing to drive it across the country to deliver it to me? ;D
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:metal in engine = bad, lots of pictures.
 

Dang metal in engine :(

Good luck finishing it up man

Re:metal in engine = bad, lots of pictures.
 

ur engine looks nice and clean...mine was all black soot on the pistons and valves...i meen lots...it took forever to scrap it off without scratching the ----...i think it was due to 108k hard driven miles on it before i got it...but i got new pistons rings now so hopefully when its all back together and in my crx it wont have any problems...soon to find out though

lewis