ls/vtec complete
 

all complete need to tune, now here are the pics, ya'll remember the rice cooker, here is his evil twin, the rice burner, rice cooker hybernating while the rice burner wear his clothes.
here are the pics.
BLOCK: b18a
Eagle H beam rods
CP 9.0.1 pistons
ACL bearings
GE blockgaurd
GSR main Girdle/windage tray
mico polished crank
ITR oil pump
Moroso oil pan/pickup

HEAD: B16A
full port and polished/5 angle valve work
crower titanium dual springs and retainers
Ferrea 5mm oversized stainless valves
GSR camshafts/jacson racing cam gears
ARP head studs
JG edelbrock intake manifold
JG edelbrock 65mm Throttle body
RC 750cc injectors
AEM fuel rail/AEM fpr

TURBO:
Precision SC61
Blocks cast iron manifold
2.5" custom downpipe
Tial 38mm wastegate 11 psi spring
2.5" charge piping
blitz super sound Bov
turbo xs dual stage boost controller
Threadstone bar and plate fmic
Nx Ntercooler sprayer
HKS mushroom filter
2.5" catback exhaust

TRANSMISSION:
b16a2
OBX LSD
8 lbs flywheel
exedy stage 2 clutch

SUSPENSION:
tokico Hp struts
tenzo R springs
energy motor mount inserts
ingalls torq damper
ebc tracksion bars
strut tower braces/tie bars

EMS:
P28 ECU UBERDATA
GM 3 bar map sensor
zt2 wideband o2
MSD 6A/blaster coil/cap/wires/NGK 7
compaq laptop
misc gauges

thats all the important ----. I am not rich, all these parts are from years of building this project. still have my built b16 block as a backup.


http://img474.imageshack.us/img474/3...arance16nh.jpg checking clearance
http://img306.imageshack.us/img306/5...stalled0ba.jpggirdle install
http://img46.imageshack.us/img46/8028/dscf00034bv.jpg b18a block
http://img98.imageshack.us/img98/24/dscf00021my.jpg cp pistons
http://img393.imageshack.us/img393/817/dscf00106vx.jpg parts
http://img486.imageshack.us/img486/4...mplete26xz.jpg pistons and rods assembled
http://img322.imageshack.us/img322/5...dgasket9ux.jpg
http://img385.imageshack.us/img385/9...omplete5cz.jpg
http://img162.imageshack.us/img162/3...dgasket4wb.jpg copper sprayed
http://img162.imageshack.us/img162/8228/gsrcams5es.jpg gsr cams
http://img322.imageshack.us/img322/7...ebefore8lc.jpg piston to valve
http://img347.imageshack.us/img347/5892/oillines5gt.jpg oil line cluster ----
http://img322.imageshack.us/img322/4...opickup2du.jpg moroso pickup and gsr windage tray
http://img322.imageshack.us/img322/5...elbolts1fl.jpg flywheel bolts
http://img347.imageshack.us/img347/7...omockup6lv.jpg sweet head
http://img90.imageshack.us/img90/811...ssembly2vi.jpg intake manifold
http://img90.imageshack.us/img90/770...egasket5vg.jpg why?
http://img90.imageshack.us/img90/934...stalled1zp.jpg all installed
http://img90.imageshack.us/img90/914...stalled7lt.jpgvalve lash adjust
http://img104.imageshack.us/img104/5333/10011150kp.jpgecu
http://img490.imageshack.us/img490/6190/10011267ng.jpgdsbc
http://img469.imageshack.us/img469/7614/10009971vc.jpgsc61
http://img66.imageshack.us/img66/6839/10010350mi.jpglsd
http://img367.imageshack.us/img367/8954/10010825ki.jpgall done

Re: ls/vtec complete
 

Looks good dude! Have to let us know how it runs and all..especially after the tune.

Re: ls/vtec complete
 

Everything looks good man. Get her tuned properly and keep us up to date with the performance.

Re: ls/vtec complete
 

Woboy baller parts.
Nice build

Re: ls/vtec complete
 

Hey, that is one nice ass ls vtec setup, you dont see people putting the time and ---- a ls vtec needs anymore, very very nice setup man, i only hiope my future lsvtec comes out at nice as yours, i want to know how this things runs

Re: ls/vtec complete
 

what kind of turbo mani is that? Does that evapo rust stuff work? where did you get it? Looks really good man

Re: ls/vtec complete
 

:o Nice set up dood, You can tell a lot of time and care was put into it. not to mention money. haha i'm just jealous. I want to do an ls/vtec build, but i'm poor and scared to take my engine apart, so I will probably puss out and just swap the head on without changing the rods or pistons. Are you using stock rods by the way? I didn't notice different ones in the pics.

Re: ls/vtec complete
 

How many oil sources do you have? ???


Looks shiny. ;)

Re: ls/vtec complete
 

from the filter sandwich the vtec oil source, and the turbo feed via stealthmode fire wall kit, from the stock oil pressure port autometer oil pressure gauge, fed via homemade steel braided line. and the 2 catch can lines from the blockeagle H beam rodsblocks cast iron, yes the evapo rust works, I bought from a Army gas stationthe thing runs great on the hondata s300, but thats not mine, I just need to get retuned on uberdata, I tried to run it on my old tune, but its running very rich.

Re: ls/vtec complete
 

nice job looks good man.

Re: ls/vtec complete
 

thanks man

Re: ls/vtec complete
 

+1 for a well done build

Re: ls/vtec complete
 

please tell me that block guard was atleast tack welded in and not just pressed...... :l

Re: ls/vtec complete
 

ha, mines not even pressed in. I smacked it with a rubber mallet untill it looked even :o Still running ok though :y

Re: ls/vtec complete
 

damn thats a nice setup.

Re: ls/vtec complete
 

Hell yea, that sounds like the ------- way to do it to me,

Re: ls/vtec complete
 

the block was put in by hand, and then I use a punch to put it in further, did it the same way with my b16, and also with my friends b16, then hone the cylinders. never had a problem

this block is bad thing is a myth, and I am sick of reading it! I cant get get my block resleeved here, at least I dont trust them to do it, so for added security I chose blockgaurd, I sleep better with it.

Re: ls/vtec complete
 

nice work. ;)

Re: ls/vtec complete
 

dont lie to us... your rich, your rich bitch!

nahh looks pretty solid though, some serious baller parts.. i'll be waiting on numbers ;)

Re: ls/vtec complete
 

----! I might have to go to the netherlands to get this bitch dynoed, Germans are useless. last time I maxed out their dyno with only 326hp, at the bosch plant, its only there to test parts. this time I know I will make more than that, especially with sc61 at 20 psi. yes I will be running 20lbs on stock sleeves on uberdata.