|
Let's see your HMT parts pile
Basically, this all sits in my bedroom and does nothing, I should get rid of it all really. Post up a pic of your HMT style junk pile :1
no im not gonna sell the audi wg. http://24.20.167.40/parts.jpg the pile: assortment of d15b abd z6 pistons (broken) audi wastegate generic foglights giant 2" 90 bend 14b turbo ford focus svt alternator (new) turboxs mbc, i think its an empty box moates ostrich (no you cant have it) willem burner (no you cant have it) how to tune and modify engine management systems by jeff hartman various tools fittings, 14b water lines and banjo bolts, etc... |
Re: Let's see your HMT parts pile
how big is that turbo
|
Re: Let's see your HMT parts pile
14b any good?
|
Re: Let's see your HMT parts pile
Originally Posted by random-strike
how big is that turbo
the inlet is 3" wide so i dont think its a 60trim t3 compressor, i could be wrong i guess.
Originally Posted by highroller54
14b any good?
|
Re: Let's see your HMT parts pile
Originally Posted by FooK
Originally Posted by random-strike
how big is that turbo
the inlet is 3" wide so i dont think its a 60trim t3 compressor, i could be wrong i guess.
Originally Posted by highroller54
14b any good?
|
Re: Let's see your HMT parts pile
1 Attachment(s)
Alright Fook here it goes:
Attachment 37502 2 garrett turbos from 2.2 Chryslers (anyone interested? ;D ) 1 carb enclosure 1 harbor freght welder (box shown only) 2 exhaust cutouts 1 K&N Air Filter 1 Throttle Body Spacer 1 log exhaust manifold (unfinished, its for the dodge) 3 exhaust pipes for the cross over piece and 1 electric fan not pictured is my turbo XS BOV |
Re: Let's see your HMT parts pile
|
Re: Let's see your HMT parts pile
Originally Posted by 70Challenger
Alright Fook here it goes:
https://i18.photobucket.com/albums/b.../pileocrap.jpg 2 garrett turbos from 2.2 Chryslers (anyone interested? ;D ) 1 carb enclosure 1 harbor freght welder (box shown only) 2 exhaust cutouts 1 K&N Air Filter 1 Throttle Body Spacer 1 log exhaust manifold (unfinished, its for the dodge) 3 exhaust pipes for the cross over piece and 1 electric fan not pictured is my turbo XS BOV |
Re: Let's see your HMT parts pile
Originally Posted by TurbodEG
i want turbo...how much and whats wrong with em? pm me
|
Re: Let's see your HMT parts pile
---- you should see my garage and work :-\
|
Re: Let's see your HMT parts pile
Originally Posted by AbaZ
---- you should see my garage and work :-\
gimme some free ----. |
Re: Let's see your HMT parts pile
Stealthmode, is there anything you dont have in that garage??? If you get any more parts the Sentras gonna be moving outside :y
|
Re: Let's see your HMT parts pile
johnny....where is your garage. I love that garage. :y
|
Re: Let's see your HMT parts pile
heres my pile :( i will be adding to this shortly. or well after christmas ;)
http://img416.imageshack.us/img416/7687/img17335dw.jpg |
Re: Let's see your HMT parts pile
http://www.thegt.org/hmt/someparts.jpg
ok so not really HMT more like HT n/a haha pictured: gsr cams sirII cams (buy these from me!!!) lsvtec oil line GE lsvtec dowels brand new stock bore p30s with pins some hd press plate from a clutch kit on ebay brand new act street disc for 92+ b series trannies brand new exedy disc that came with ebay kit for 90-91 trannies (FOR SALE!!!) arp head studs for a b20 cometic HG for lsvtec full b16 gasket set password jdm intake mani gasket new msd wires yooooo new itr oil pump new gsr water pump new gsr timing belt+tensioner OEM oil filter!!!! At machine shop: b18b block ls rods/crank arp rod bolts b16 head head is getting resurfaced, valve seals replaced, stock exh springs swapped out for duals from an itr, 3 angle valve job, cleaned ect NO p&P (i dun have that kinda $ right now :P) block is getting decked, honed, cleaned crank is getting polished/cleaned rods are getting shot peened and resized after rod bolts are pressed in then a full rotating assembly balance machinist also said something about re-doing oil clearances? In the basement/scattered around new b16 obd1 dizzy from dist king jkobd conversion harness obd0>obd1 p06 converted to vtec/chipped oem honda rings brand new hasport mounts with hydro conversion for now im stuck with a 2001 hydro ls tranny ): some dented up 4-1 header im borrowing from friend until i can try to afford one stock p30 intake mani I may port out. I just need to order an adjustable fpr, some adj cam gears and my acl std size bearings and im good to go! I do have all the other swap stuff as well... 90-93halfshaft, 90-93 axles, rear bracket ect... It's all going into my 90 crx si :D I'll take pics when i get everything back form the machine shop/when I'm assembling it all. I dun have any ultimate goals for it yet I just wanted to play my hand at an all motor honda. ---- better rip :P |
Re: Let's see your HMT parts pile
My kit for my CRX minus my Traction bar set up and my manifold which are at the shop!
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg |
Re: Let's see your HMT parts pile
^^^^^ Good Luck with that Delta Creeper ;)
|
Re: Let's see your HMT parts pile
is that 2 obd0 socketed ecus csaddict? hit me up ona pm if u dont need both.
|
Re: Let's see your HMT parts pile
|
Re: Let's see your HMT parts pile
|
Re: Let's see your HMT parts pile
Originally Posted by FooK
Basically, this all sits in my bedroom and does nothing, I should get rid of it all really. Post up a pic of your HMT style junk pile :1
anybody want anything, no you cant have the turbo/wg/mani/dp combo http://24.20.167.40/parts.jpg the pile: assortment of d15b abd z6 pistons (broken) audi wastegate generic foglights giant 2" 90 bend 14b turbo ford focus svt alternator (new) turboxs mbc, i think its an empty box moates ostrich (no you cant have it) willem burner (no you cant have it) how to tune and modify engine management systems by jeff hartman various tools fittings, 14b water lines and banjo bolts, etc... |
Re: Let's see your HMT parts pile
Originally Posted by 88dx
^^^^^ Good Luck with that Delta Creeper ;)
|
Re: Let's see your HMT parts pile
Originally Posted by rawr
|
Re: Let's see your HMT parts pile
Originally Posted by CSaddict
My kit for my CRX minus my Traction bar set up and my manifold which are at the shop!
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg You sellin |
Re: Let's see your HMT parts pile
ok guys, no the audi wg isnt going anywhere, unless you want to give me $1000 for it. plus shipping. :1
|
Re: Let's see your HMT parts pile
Originally Posted by VtecHatch
Originally Posted by CSaddict
My kit for my CRX minus my Traction bar set up and my manifold which are at the shop!
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg You sellin |
Re: Let's see your HMT parts pile
|
Re: Let's see your HMT parts pile
where yall geing the pipe with the 45 and the 180
|
Re: Let's see your HMT parts pile
where yall geing the pipe with the 45 and the 180 |
Re: Let's see your HMT parts pile
to much ---- leading up to the pile for me to remove it. whole closet is full of parts and ill prolly have doors and ---- in there when i strip down my other wrecked hatch.
http://www.partyeastcarolina.com/pho...ize/193284.jpg |
Re: Let's see your HMT parts pile
---- my mom whould kill me if i had all that i have in in cars and bukets
|
| All times are GMT -5. The time now is 11:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands