HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   knocking/banging from upper motor (https://www.homemadeturbo.com/general-discussion-6/knocking-banging-upper-motor-51048/)

ammadien 11-29-2005 07:25 AM

knocking/banging from upper motor
 
hi guys,

me and my brother have a SHWEEET 92 gs eclipse w/ turbo. thing was beat to crap, 190 k the kids before me had the boost at 20 psi. i dunno how that worked out, i was under the impression it would go into fuel cut...but i dunno. ok on to the problem.

i get it started, there is a Very loud very distinc banging coming from the upper engine give or take. it sounds like its coming from the valve cover, where the cams are, or where the crank/camshaft position sensor is. we took the valve cover off, and one of the cam lobes had a little nick in it, one of the lobes on the intake cam. we turned it over with the valve cover off and that lobe doesnt hit anything and when you turn it over, not start it jsut turn it over there is no sound. also once i get it running and rev it up a little, like .5k-2k it gets worse, sounds like something is broke in the head or somethin and is knocking around, then at 3k it is signifigantly better, but still there intermittantly.

any ideas? i got a couple votes for a spun bearing, rod knock, and mabe lifter problem. if i use a stethascope and the sound is louder on the top, then it might be a lifter, if its from the bottom it could be rod knock or a spun bearing? thanks in advance

Nate
Edit/Delete Message

NBLKID 11-29-2005 10:23 AM

Re: knocking/banging from upper motor
 
spun bearing, rod knock.... would be my guess, but really cant tell without hearing it or looking at it

mahcivic 11-29-2005 10:39 AM

Re: knocking/banging from upper motor
 

Originally Posted by NBLKID
spun bearing, rod knock.... would be my guess, but really cant tell without hearing it or looking at it

i was gonna say the same thing, you got yourself a rod knock. motor is done

jinxy 11-29-2005 11:30 AM

Re: knocking/banging from upper motor
 

Originally Posted by mahcivic

Originally Posted by NBLKID
spun bearing, rod knock.... would be my guess, but really cant tell without hearing it or looking at it

i was gonna say the same thing, you got yourself a rod knock. motor is done


ghettoturbo 11-29-2005 12:18 PM

Re: knocking/banging from upper motor
 
i had a 4g63 that had an intermittent knock...i think it was something with the balance shafts as it ran like that for 2 more owners and it had 180k on it when i sold it.

spoon fed 11-29-2005 12:21 PM

Re: knocking/banging from upper motor
 
Those things are known for bad muffler bearings. Just go to Autozone or PeP boyz..they will hook you up.

Random Hero 11-29-2005 01:14 PM

Re: knocking/banging from upper motor
 
its definatly a rod knock, have fun pulling the motor!

Donald125 11-29-2005 01:19 PM

Re: knocking/banging from upper motor
 
hey at leats it`s not a AWD :-X

1337 11-29-2005 01:36 PM

Re: knocking/banging from upper motor
 

Originally Posted by spoon fed
Those things are known for bad muffler bearings. Just go to Autozone or PeP boyz..they will hook you up.


J-SMITH69 11-29-2005 02:15 PM

Re: knocking/banging from upper motor
 

Originally Posted by 1337

Originally Posted by spoon fed
Those things are known for bad muffler bearings. Just go to Autozone or PeP boyz..they will hook you up.




All times are GMT -5. The time now is 05:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands