ka24de ring land pwnage
 

i bought my 240 for 550 bucks a while back, 91 se fb (no lsd). the guy said he ran the engine for 36 miles w/o coolant and it had low compression, assumed it was hg or burnt rings. ... so i disassemble the engine, and the ring to wall clearance is HUMUNGOUS, i could stick a dime down the side of cylinder number 1, and the others werent looking very good either. Then upon further diassembly i pull the pistons out and they look nice, very very very shiny and new, the bearings look great, hardly any wear, and the crank looks very very good. But after closer inspection upon the pistons i find this...
http://i2.tinypic.com/osbd40.jpg


the piston to wall clearance was too large, which caused the ringlands on ALL 4 pistons to break. And yes this engine has a sticker from attarco on the side of it so i have no doubt it was bought from them, but geez, whoever did the machining on the bores did a terrible job ( pistons are .020 over) it looks like i could damn near slap some .040 over pistons in and it would fit all fine and dandy.

Re: ka24de ring land pwnage
 

Prediction: a minimum of 5 people will call you a ------ in this thread. :S

Re: ka24de ring land pwnage
 

its actually wigger.

Re: ka24de ring land pwnage
 

Re: ka24de ring land pwnage
 

That's what you get for being a dumb-ass gook wigger.

Ching chong meow, bitch.

Re: ka24de ring land pwnage
 

you guys hurt my feelings so bad, im goign to go make a im leaving thread :-[







































leaving to go ---- your mommas, all of your mommas, especially you, maybe i'll bang your sisters or daughters if theyre over 5 years old

Re: ka24de ring land pwnage
 

You are very creative, wigger-san.

http://media.putfile.com/MVI_3430

Re: ka24de ring land pwnage
 

---- son, that sux...

Re: ka24de ring land pwnage
 

how dose the piston to wall clearance being to big cause the ringlands to break? I didnt think it was possible to break ringlands NA :S

Re: ka24de ring land pwnage
 

your a ------ I mean wigger ;)

Re: ka24de ring land pwnage
 

amen

Re: ka24de ring land pwnage
 

Broken piston rings, not ring lands, you dumb fucken slant eyed gook bag. 8)


------. :6

Re: ka24de ring land pwnage
 

steve you gook, theyre the ring lands off the piston, not the rings, even i can see that with my slanty eyes

Re: ka24de ring land pwnage
 

The picture looks like rings. Wanna taste my jumbo sow, I give it to you now.

http://img209.imageshack.us/img209/6057/pekpekmo3bf.jpg

Re: ka24de ring land pwnage
 

------/wigger

Re: ka24de ring land pwnage
 

damn, thats crazy. whats next? sr or just rebuild the ka?

Re: ka24de ring land pwnage
 

i know isnt it? ------ 36 miles and this happens, the mexican that had the car before me must have smashed on it hard to break all 4 pistons. but this engine is getting rebuilt for my friends s13.

Re: ka24de ring land pwnage
 

Atleast you knewing buying the car that it was going to need a something along the lines of a motor.

Re: ka24de ring land pwnage
 

Re: ka24de ring land pwnage
 

it sucks that that was the problem, good luck on the rebuild.

Re: ka24de ring land pwnage
 

according to darksol2005, a asain wigger is called a bruised banana :y..

but that ---- sucks ass,
are you sure you didn't try to tune it with the spark plugs again? :S

------/wigger

Re: ka24de ring land pwnage
 

Hey man, I heard tuning with spark plugs is better than Crome and all that other ----.

Re: ka24de ring land pwnage
 

dont be mad you guys cant use the super jdm full moon spark plug tuning method of jdmNESS, bitches

Re: ka24de ring land pwnage
 

gigger

Re: ka24de ring land pwnage
 

WHAT would you call a chinaman/------? Chigger, maybe?

Re: ka24de ring land pwnage
 

SANDNIG!!!!!!

Re: ka24de ring land pwnage
 

or maybe "-------san"