JK Motorsports CRX Traction Bar Owners
 

Hey guys,
If you have or if you can take some pictures of your traction bars and post them in here we would appreciate that. A lot of people want to see the two bolt design at work and a lot of others just want pictures of how low they sit and how the radiator tabs work. So if you can get some pictures of those areas and post them here or email for us to post, that would be great.

Thanks to anyone who posts.

Re: JK Motorsports CRX Traction Bar Owners
 

I dont have any pictures, but thumbs up to LSD for getting my ---- here asap. Ordered some replacement traction bar parts on Monday, and the ---- is already here so I can race on Friday. :y

Re: JK Motorsports CRX Traction Bar Owners
 

Well, my traction bars are on the way. Tomorrow I'll be installing turbo (assuming I can find a wastegate) and will have the bumper off the rex. :6

Re: JK Motorsports CRX Traction Bar Owners
 

Nice, snap some shots if you get a chance.

Re: JK Motorsports CRX Traction Bar Owners
 

Attachment 28197
Attachment 28198
Attachment 28199

radiator sits perfect O0
Attachment 28200

Re: JK Motorsports CRX Traction Bar Owners
 

if u ever woulda called me back about the traction bars i coulda had some pics fo you :l

he still wants one, but he's recovering from a full on theft issue. he basically had to start over, so ill hit up when he's in need again.

ps. wassup with that turbo mike.

Re: JK Motorsports CRX Traction Bar Owners
 

i could post some pics but i have the old 1 bolt design, how does one go about buying the two bolt brackets and ----?

Re: JK Motorsports CRX Traction Bar Owners
 

These are teh old style since i never received my replacement brackets :'(

http://img526.imageshack.us/img526/1...04795jk.th.jpg

http://img526.imageshack.us/img526/4...04800qv.th.jpg

Re: JK Motorsports CRX Traction Bar Owners
 

Launching hard on them, but it's cold out and we're having a hard time breaking past the 10.5's. I think it's time for 26" slicks.

http://img362.imageshack.us/img362/9...6071149ta2.jpg

I'll get a better picture of the sweet JK Motorsports decal in the morning. :)

Re: JK Motorsports CRX Traction Bar Owners
 

marry me joseph davis!!!!


NOTICE: this reply in no way shape or form is an invitation for ghey butt sects. but i will require you to share all of your vehicles, knowledge, and a few home cooked meals a week. that is all

Re: JK Motorsports CRX Traction Bar Owners
 

i dont know if they have been changed since about a year ago. but i ran into a couple of problems on my traction bar. first problem was the single bolt design on the lower control arm. it would pivot and losen the bolt. so i modified it. as seen in the pics. second was. i had a LS swap with stock springs. i would hear a grinding noise pulling out of steep driveways. i found out it was the stock LS crank pulley hitting the traction bar. so if i would have tried to lower the car at all it would have hit on the bar. so i solved that with CTR N1 crank pulley. minor problems for me. but it performed as it should.

Attachment 28120
Attachment 28121
Attachment 28122
Attachment 28123
Attachment 28124

Re: JK Motorsports CRX Traction Bar Owners
 

Bulldog9279, here is the new connecters and hardware...
i am sure if you contacted mike he could eventually get you a set.
http://img267.imageshack.us/img267/1585/jkheimvc3.jpg

Re: JK Motorsports CRX Traction Bar Owners
 

yea it was a long time ago. hell i may have even said something to him. just dont remeber if i did. :6