JDAVIS, check my attempt @ alky calculations!
Ok, so i read and reread some of your old posts and this is what i could come up with...
What ive done is taken about 20% fuel out of my original pre alky injection map (450cc injectors). I'm currently using a 330cc (roughly 22% of 85% ID w/DSM 450cc) spray nozzle w/ sureflow 150psi pump + progressive controler I think i'm going about this ass-backwards but O'well... my car runs great the way it sits and i don't want to touch the fuel. 'figure that alky is 2 parts to 1 part gasoline' 330cc/3= 110cc **this is probably wrong** alky=2 x 110= 220cc --------- 220/330= 66% alky h20= 1 x 110=110cc --------- 110/330= 34% h20 or do i figure... 4x450cc= 1800 .85 x 1800= 1530cc 1530 x 11% (half of 22% with 50/50 mix)= 168.3cc .......................................... ----... i don't know what i'm doing now give me your thoughts... |
Re: JDAVIS, check my attempt @ alky calculations!
the alky goes in your mouth not in the car ???
|
Re: JDAVIS, check my attempt @ alky calculations!
alky and ADH don't work well together
|
Re: JDAVIS, check my attempt @ alky calculations!
You're a little off.
I have to drive to Morganton to tune BRMS' car, no time to reply not BUT this post assures you're in my post history + will answer tonight/tomorrow. |
Re: JDAVIS, check my attempt @ alky calculations!
thanks!
I'm using a PLX m300 at the moment but in about 2 weeks i'm gonna order up the AEM wideband/lambda gauge. Everytime i mash the gas the ------ PLX goes flying, its pissing me off... Ive been wanting to get something i can actually mount... the Lambda display should be more precise when ------- with alky/h20 eh?? |
Re: JDAVIS, check my attempt @ alky calculations!
Originally Posted by ichbinsobose
the alky goes in your mouth not in the car ???
|
Re: JDAVIS, check my attempt @ alky calculations!
Saranac 12 beers of summer ftw
|
All times are GMT -5. The time now is 05:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands