Integra DC2 Radiator in 96-00 civic pics
 

http://www.funkyproductions.net/labs.../DC2RadEK1.JPG
http://www.funkyproductions.net/labs.../DC2RadEK2.JPG
http://www.funkyproductions.net/labs.../DC2RadEK3.JPG
http://www.funkyproductions.net/labs.../DC2RadEK4.JPG
Enjoy!!!!!!!!!!

Re:Integra DC2 Radiator in 96-00 civic pics
 

Very tidy job! :D

Re:Integra DC2 Radiator in 96-00 civic pics
 

nice work! what all did you have to make/change to get it to fit in there? i have a 97 and i'm gonna need a new radiator so i might be tryin this out. maybe post a write up of how you did it?

Re:Integra DC2 Radiator in 96-00 civic pics
 

follow exact instructions of
http://hybrid2.honda-perf.org/tech/jsrad/jsrad.html
beside the top mount had to fabricate differently as the bolt holes on a ek are different than an eg up top

also its a strugle to get the hoses onto the integra radiator because the inlet and outlet are a little larger but with a little soap and man power it will work or i guess you could buy slightly larger radiator hoses but i decided not to because of the add cost to my $75 project

i picked up the radiator off a guy locally for $70 who sold his gsr before getting to install it. he purchased it off ebay from this company for $105
http://stores.ebay.com/id=1642196
then the bracket stuff cost less than $5

if you have anymore questions send them my way by the way it cools so well the radiator fan havent turned on yet u also loose ur condenser unless u wanna fabricate some way to keep ur a/c but mine didnt work so i took all the a/c components off at the time of remove of the radiator

Re:Integra DC2 Radiator in 96-00 civic pics
 

why did you do this?...ive never had a cooling problem with my half rad in my ek

Re:Integra DC2 Radiator in 96-00 civic pics
 

current radiator had hole future turbo engine will have more heat to get rid of and far future h22a with turbo will have even more heat.

Re:Integra DC2 Radiator in 96-00 civic pics
 

eh...my setup was never watercooled so it didnt matter...plus my manifold set the turbo right where your rad is...

Re:Integra DC2 Radiator in 96-00 civic pics
 

these arent permanet mounts i wanna weld some mounts that would bring it closer to front of the chassis but ill worry about that if i have problems with clearance with a hf mani and t25

Re:Integra DC2 Radiator in 96-00 civic pics
 

just hack up that y7 manifold...works fine

Re:Integra DC2 Radiator in 96-00 civic pics
 

yeah i was thinking that too but i heard welding to pot metal is shitty