I'm boosted Niggaz (pics inside)
 

Well, after planning on it for a good while and slowly accumulating the kit peice by peice, i have finally turbo'd my car. Its a junkyard turbo kit based around a 42/48 T3. I dont know what to say, and pics are cooler than words, so here ya go:
Ready for all Questions, Comments or Flaming(you will get cussed at) :thumbup:

The N/A setup:
http://img28.echo.cx/img28/5703/10003043zi.jpg

Turbo setup:
Downpipe (custom fabbed by 90BlackCrx) bolted up to Turbo
http://img141.echo.cx/img141/7599/10002361vf.jpg
My friend Drew (CrxDrew) Cuttin ---- for clearance
http://img281.echo.cx/img281/5357/drewcutting5du.jpg
The radiator bracket made to fit my EG radiator.
http://img281.echo.cx/img281/133/radiatorbracket1ch.jpg
Drew's failed attempt to weld to aluminum :P
http://img281.echo.cx/img281/1985/drewwelding3wc.jpg
Engine shots:
http://img261.echo.cx/img261/3218/boostedengine5xd.jpg
http://img281.echo.cx/img281/4914/boostedbay3oc.jpg
Bov Jb Welded to the pipe, holds strong :thumbup:
http://img281.echo.cx/img281/5329/bovshot0ym.jpg
Downpipe bolted up and on the car, good amount of clearace
http://img281.echo.cx/img281/2618/dpclearance2nd.jpg
Frontal shots:
http://img281.echo.cx/img281/3746/grillshot0cn.jpg
http://img281.echo.cx/img281/9606/in...lershot9nm.jpg
Arial view of the radiator and intercooler, both gangsta leaned.
http://img281.echo.cx/img281/1631/ra...rcooler3gm.jpg
I didnt have a gasket, so we fabbed one up out of sheet metal for now.
http://img281.echo.cx/img281/5747/shittygasket4uu.jpg

And thats about it for now. It was definately well worth it, spools up nicely and doesnt burn any oil. Still got a few kinks to work out but, all and all i'm satisfied. Thanks for lookin :thumbup:

Re: I'm boosted Niggaz (pics inside)
 

Looks good man O0

Re: I'm boosted Niggaz (pics inside)
 

goodjob :) what are you useing for ecu control/fueling

Re: I'm boosted Niggaz (pics inside)
 

nice work. looks like everything fits well.

Re: I'm boosted Niggaz (pics inside)
 

Yeah looks pretty clean. The downpipe came out great :)

Re: I'm boosted Niggaz (pics inside)
 

Thanks. Yea everything did fit pretty well. We had a bunch of that flexible hose sittin around from other intercoolers so that came in handy and used an aem cold flipped backwards to router down there.
Fuel management is DSM 450's with chipped pm6 ecu.

Re: I'm boosted Niggaz (pics inside)
 

looks great. wouldnt be HMT without the jb welded bov 8)

Re: I'm boosted Niggaz (pics inside)
 

Nice job. Screw gaskets, I don't have gaskets from my mani to turbo or turbo to downpipe :-X

Re: I'm boosted Niggaz (pics inside)
 

Good job on the setup, nubian soldier. ;D

Re: I'm boosted Niggaz (pics inside)