|
Re: I got high off my turbo! *PICS*
Ricky that sounds much better. Take this opportunity to come up with the dimensions and make some money for yourself. If you could sell them to us for $30 they'd get snatched up and make you some extra money. Just estimate measurements based on the picture. The mouthpiece needs to be maybe 1-1.5" across. Later i'll try to come up with some.
|
Re: I got high off my turbo! *PICS*
Originally Posted by Ricky101
okay so my manufacturer said he will make it, but he needs these specs:
the Height, Ball diameter, Carb hole diameter, Bowl and mouth diameter, thickness of glass in mm. once i get those , i can get the sample made, which is the most expensive..but once it has been made shouldnt cost more than $15 bucks each.. |
Re: I got high off my turbo! *PICS*
I'll take a $30 one for sure
|
Re: I got high off my turbo! *PICS*
Originally Posted by ososlohatch
lol ... i think im just going to get one made for myself for 145 and then have all you fags envy me with you 20 dollar ching chang meow replicas that blow seals on the first panty ripper :P ... all jokes aside i am just going to get a custom one made for myself i dont wanna get 10 made and then not sell them
http://img170.imageshack.us/img170/9995/pict0134oh6.jpg http://img125.imageshack.us/img125/6544/pict0135yb7.jpg |
Re: I got high off my turbo! *PICS*
|
Re: I got high off my turbo! *PICS*
so these r the demensions im guessing
4 inches long 2 inchese wide mouth - 1inch diameter bowl - 1inch diameter carb- .25 diameter glass thickness - 2mm or 1.5 mm do these seem about right? |
Re: I got high off my turbo! *PICS*
Originally Posted by Ricky101
so these r the demensions im guessing
4 inches long 2 inchese wide mouth - 1inch diameter bowl - 1inch diameter carb- .25 diameter glass thickness - 2mm or 1.5 mm do these seem about right? 1.5-2mm sounds too thin :P For a piece that big, I'd honestly say around 5mm, you gotta realize how thin a mm is, and I'd rather pay more for a thick pipe than a thin one that will easily break and piss me off because it'll be hard as ---- to find a replacement. Tell him you want it triple blown + 1 (quadruple blown, fore-blown?). I've dropped pipes on cement that were triple blown without any problems, but being that this is a bit bigger, I'd like that one extra for security :6 |
Re: I got high off my turbo! *PICS*
Originally Posted by Jorsher
I'd say more 3" wide, and around 5-6" long, but that's just my estimate comparing the mouthpiece to the length on the picture, it looks like the mouthpiece might be around 1.25. 2" wide really sounds too small though, measure it out and you'll see what I mean. Also, if you look at the picture, the mouthpiece looks to be about 1/3 the entire length of the turbine.
1.5-2mm sounds too thin :P For a piece that big, I'd honestly say around 5mm, you gotta realize how thin a mm is, and I'd rather pay more for a thick pipe than a thin one that will easily break and piss me off because it'll be hard as ---- to find a replacement. Tell him you want it triple blown + 1 (quadruple blown, fore-blown?). I've dropped pipes on cement that were triple blown without any problems, but being that this is a bit bigger, I'd like that one extra for security :6 |
Re: I got high off my turbo! *PICS*
okay no problem.. i will give the word today and get an estimate
|
Re: I got high off my turbo! *PICS*
one last question, would you guys like it any specific color? maybe a translucnt red..like a hot turbo
|
| All times are GMT -5. The time now is 04:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands