how to remove rounded nuts
ok people, i tried to look for posts on hmt about it but couldnt find so here goes... im currently in process of installing MY turbo setup on my car, but i ran into a big problem..i rounded my nuts from trying to unbolt the header. i tried to take it off with 12mm 12 sided socket, and it completely rounded 5 of my nuts leftover. to get them off, read this forum. it basically says
1. try to take bolts off when engine is warm, or get a torch to heat up bolts *heat expands metal* 2. use wd-40 and let it soak 3. use sears unbolting thingy 4. split the nut by drilling, cutting, wedging, etc http://forums.nasioc.com/forums/show...hreadid=405930 hope this helps you and me out..werd |
Re:how to remove rounded nuts
ya i use pb blaster and vice grips and if that dosent work bust out the torch
|
Re:how to remove rounded nuts
Originally Posted by ZexRex
ya i use pb blaster and vice grips and if that dosent work bust out the torch
|
Re:how to remove rounded nuts
I couldn't take my axle bolt twice..2 different cars....I just sawed them off ;D. Works like a charm
|
Re:how to remove rounded nuts
all else fails, just give it a good kick, and to be honest with u all for certain things rubbing alcohol is a great lubricant... other then that wd-40 is still raping the market
|
Re:how to remove rounded nuts
Craftsman has some remover/pullers you may want to look at
|
Re:how to remove rounded nuts
Sanp-on long throw air hammer. just bust off those pesky bolts/nuts, and replace the studs with new, the heat always corrodes them anyway. when you do replace them, use locktight on the head side of the studs, and antisieze on the nuts/exhaust side of the studs. that way you wont have probs with them again. Like may dad used to say you always got time to do it right once, but you never have time to do it over.
|
Re:how to remove rounded nuts
I stripped a nut on my catylic converter and took off the whole exhaust system and used a bench grinder to get rid of the nut. those exhaust hangers are a bitch though
|
Re:how to remove rounded nuts
kroil is 10x better than WD40
you reall need to use 5 sided sockets :) one thing i did on a stripped nut before, was take a file and make your own edges... then find a socket that will fit it... taht works really well |
Re:how to remove rounded nuts
Originally Posted by random-strike
one thing i did on a stripped nut before, was take a file and make your own edges... then find a socket that will fit it... taht works really well
Of all those times I used Vice grips and a mallet... damn.. excellent idea! |
All times are GMT -5. The time now is 05:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands