How much would you pay?
I am looking for a general consensus on how much you guys would pay for a 1990 civic hatch DX 5 speed. The color is red but needs repainted (fading). It has a mini-me swap in it (said to have been rebuilt). the guy just finished a DPFI to MPFI conversion on it and is said to run now. The ecu is one for a non-vtec motor though, so vtec wont engage. The brake rotors probably need turned and it needs new pads along with bleeding. It also needs a new exhaust system and or bolting it all back up (cant remember). It needs an alignment and new tires. The interior is being swapped out to a blue color so it wont have the original gray color anymore. It has no options (all manual) The guys is looking for $1200 without fixing any of the problems on it. What would you pay?
|
Re: How much would you pay?
800-1000
|
Re: How much would you pay?
your gonna spend around $300-500 fixing things on it right away, i'd have to somewhat agree with rawrs price range, altho i think he's being a little genours with the 1000
|
Re: How much would you pay?
yeah I was a little skeptical when I found out that it needed more work than I thought. Plus I would have to tow it to my house to found out everything that will need to be fixed :-\
|
Re: How much would you pay?
Originally Posted by Anubis_4_99
your gonna spend around $300-500 fixing things on it right away, i'd have to somewhat agree with rawrs price range, altho i think he's being a little genours with the 1000
|
Re: How much would you pay?
Yeah really. I looked at a 89 DX 5 speed stock with 200+k miles and they wanted 2100. They are expensive around here. And if you find a rex under 3 grand your lucky.
|
Re: How much would you pay?
yeah there pretty expensive here to for a car that blue books for $1000 in excellent condition :l. I however found a wholesale lot that has some good deals, so Ill look into that before I hand any cash over :6
|
Re: How much would you pay?
The car has a z6 bottom end and a y8 head. all rebuilt. y8 intake mani with b16 throttle body. What it needs is some tranny fluid and some front brakes and an alignment. It has a full exhaust all you need is some exhaust bolts were it bolts to header which is aftermarket ( dont remember what though). HAs an act clutch and d16a6 transmission It runs but no vtec, youll have to go obd1 or get a vtec controller. Chances are you can get the paint buffed back lookin good, but since you said you had already planned on gettin it painted then why complain about the paint. Last time i looked the tires were ok.
|
Re: How much would you pay?
750
|
Re: How much would you pay?
I paid $1500 for my 1991 Civic Si.
|
Re: How much would you pay?
Originally Posted by 1991civicsi
I paid $1500 for my 1991 Civic Si.
|
Re: How much would you pay?
The body had 140k mi.,pretty straight, paint shiny but rust on rear quarters. Interior was good except for a wear spot on rear fold down seats, no rips or burns though. Engine was swpped w/ another 1.6l (not sure of correct mileage). Excessive smoke due to valve guides. 5sp was noisy, brakes had x-drilled rotors but rear pistons were n/g. Many misc. but necessary parts were in need of replacement. (main relay, dizzy, etc.) I was hasty in buying the car and I may have overpaid, but after all of the work Ive done to it I dont regret it at all. Maybe I should have been patient and saved for the GN I really wanted.
|
Re: How much would you pay?
Got my 1994 DX Sedan man. in perfect working order, oxidation on the roof, other than that, in perfect working order. Parents paid $1000 for it as a birthday present.
|
Re: How much would you pay?
If the body is straight and rust free I would pay the $1200. Its getting pretty hard to come by a rust free, hell even a good condition ef hatch these days(where I live anyway). So to me it seems like a pretty good deal even if it needs some minor work.
|
Re: How much would you pay?
Originally Posted by 90turbohatch
If the body is straight and rust free I would pay the $1200. Its getting pretty hard to come by a rust free, hell even a good condition ef hatch these days(where I live anyway). So to me it seems like a pretty good deal even if it needs some minor work.
|
Re: How much would you pay?
Dosen't sound to bad for $1200 just needs some TLC, the body is what would be the price maker, clean with no rust its worth it...
Andy hows the teg treating you, haven't heard from you |
Re: How much would you pay?
Originally Posted by Loserkidwac
Dosen't sound to bad for $1200 just needs some TLC, the body is what would be the price maker, clean with no rust its worth it...
Andy hows the teg treating you, haven't heard from you |
Re: How much would you pay?
Originally Posted by jecu
were are you located because all cars are rust free here :l
|
Re: How much would you pay?
Originally Posted by jecu
but considering that they only blue book 1100 in PERFECT CONDITION, I dont know maybe I just dont see the "hidden value"(Demand) for these cars. Im just looking for a commuter till I save more money to buy a nice teggy :P
|
Re: How much would you pay?
Originally Posted by Loserkidwac
Hondas never sell for BB value, look up the NADA value, if you want a commuter buy a geo
|
Re: How much would you pay?
Well i can't really tell you what the differences is but look on there websites and they will tell you what they base there numbers off of...Kinda simple supply and demand, people want hondas, nice ones are getting harder to find, when i buy a honda i base most of the value on body, motors are cheap, yea you can repair a body but Its easyer to get a good motor, if there is any body damage if its only on bolt on parts then shouldn't be a big problem and well paint on an older car isn't going to be perfect, the car seems like a good deal and should be solid with a little work but with any used car you could be getting someone elses headache, do you know why he is selling the car?
|
Re: How much would you pay?
yeah hes selling it to get another ef hatch (Si), I just didnt think the old hatches were really wanted, because I mean its just......an old hatchback :P
Im just getting a little turned off because I really didnt want someones else's project and need something I can jump right into and drive, oh well |
Re: How much would you pay?
EFs are still a wanted car grrr...they are the cheapest hondas and still have a good aftermarket following, yea most people want there own project if thats the case then don't look at a car that isn't stock, oh course you gonna pay more for a clean stock car than you would for a modded car (unless the person dosn't know what they have) but then you don't have to look at it and be liek wat was this person thinking, or how did they do this
|
Re: How much would you pay?
Originally Posted by Loserkidwac
EFs are still a wanted car grrr...they are the cheapest hondas and still have a good aftermarket following, yea most people want there own project if thats the case then don't look at a car that isn't stock, oh course you gonna pay more for a clean stock car than you would for a modded car (unless the person dosn't know what they have) but then you don't have to look at it and be liek wat was this person thinking, or how did they do this
|
Re: How much would you pay?
Jason if your having so many problems with my car now then just dont buy it.
|
Re: How much would you pay?
offer him a shiny nickel. He will accept.
|
Re: How much would you pay?
Originally Posted by mattnteclipse
Jason if your having so many problems with my car now then just dont buy it.
|
Re: How much would you pay?
got mine for 400 i wouldnt pay over 1000 for it
|
Re: How much would you pay?
Originally Posted by jecu
I find the clean stock cars to be cheaper around here than the modded (riced out) cars. I see people selling $500 cars for $5000 because they have a $1000 motor swap in it :3
mattnteclipse your car seems well priced, I wasn't even talking directly about your car in half this thread but just making sure you knew i wasn't bad mouthing you ;) |
Re: How much would you pay?
Loserkidwac dont worry bout it never thought you were. Between the ------ flu and this i dont really need the stress of wondering what the hell your gonna do. If you think im asking to much then tell me, make my life easier.
|
Re: How much would you pay?
Originally Posted by mattnteclipse
Loserkidwac dont worry bout it never thought you were. Between the ------ flu and this i dont really need the stress of wondering what the hell your gonna do. If you think im asking to much then tell me, make my life easier.
|
All times are GMT -5. The time now is 09:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands