How many of you have blown your motor with your HMT?
 

just currious, and what fuel managment were you using and boost psi also?

Re:How many of you have blown your morot with your HMT?
 

d15b7... was the first to go on 15psi.. with afc hack
d16y7... was my second on uberdata on 10psi
so far so good on my d16z6 running uberdata 10psi on pats map

Re:How many of you have blown your motor with your HMT?
 

are you running an SAFC along with the Uberdata?

Re:How many of you have blown your motor with your HMT?
 

nope..

Re:How many of you have blown your motor with your HMT?
 

brke ring lands on 4 pistons in d16a6, all were on intake side, only half way around the piston, same spots on all 4 really wierd, i was running 6 psi with fmu for about 6-7 monthes beating the hell out of it...no timing retard, just fmu, and side mount intercooler, and greddy turbo kit..

Re:How many of you have blown your motor with your HMT?
 

hey chevy, do you think I'll blow my motor on a d16z6 at 10psi on a t25? Right now i'm using afc hack with 450's, but changing to uberdata as soon as I figgure it out more :-\

Re:How many of you have blown your motor with your HMT?
 

naa.. if ur running as rich as u say u are youll be fine for a while.. is my guess.. but do switch to uberdata.. that is the best choice.

Re:How many of you have blown your motor with your HMT?
 

a screwed up a bearing in a a d16y8(the best motor I ever owned) at 5psi
I fried some piston rings on a d16z6

I believe both where with a afc hack.

Nick

Re:How many of you have blown your motor with your HMT?
 

B16 10-12psi T3 Hdata. Ringlands #3 Twice
B16 9.7cr 12-14psi SC61 Hdata. Ringlands #3
My old A6 lasted 2yrs 7psi FMU, no problems.
Current B16 at 9:1cr 10psi SC61 CROME (today atleast) is holding up well.

I guess Ill claim partial victory over Random Strikes LS ringlands, lol

Re:How many of you have blown your morot with your HMT?
 

I thought 6psi was max on a D16Z6 with the rods and pistons stock???
maybe I should look into this a little more? I was gonna be really happy with 8psi....but 10?

Re:How many of you have blown your motor with your HMT?
 

is an A6 stronger than other D's?

Re:How many of you have blown your motor with your HMT?
 

On HMT
-D15? (dx) on 10psi with FMU and 310 injectors.
-D16Z same setup above.

ALL MOTOR setup i blew...
-Fully built LS/VTEC (13.4 1/4 mile, 12.8 with 50 shot), Melt a hole in one of the Pistons
-H22 in 94 civic hatch (raped the motor)
-H23 in 92 prelude SI (dont know why), and year later
-H23 AGAIN in same car as above, Now my friend owns car and it has a H22 (car i drove from NYC to Florida when i relocated)
-LS/VTEC what was in current car, (motor before B16 turbo)



as you can see i have no luck with ALL motors....:D

Re:How many of you have blown your motor with your HMT?
 

::does backflip::

Re:How many of you have blown your motor with your HMT?
 

prepare to do another one......i am about to fully build a LS block, and when i do i am goin to give this lil B16A 20 PSI on Uberdata and see how it holds up.....(with a 3bar map) :D

Re:How many of you have blown your morot with your HMT?
 

im still seein no one with more than 6psi on a stock D16Z6 salefy....is 8lbs safe? did you blow the motor with 10lbs?

Re:How many of you have blown your motor with your HMT?
 

FYI Nitrous is not N/A ::)

Re:How many of you have blown your motor with your HMT?
 

it's all about your engine management.

If you throw on a fmu and run 10 psi then say goodbye to your engine in a little bit.

If you rape your engine like a female roommate with no rent then say goodbye to your engine.

If you decide to do some street tuning with no clue of what you're doing then...

There's alot of variables, a healthy d16 can handle 10 psi for a long time (notice you haven't asked who is running 10 psi for a long time, there are lots of setups running this)

If you use conservative numbers when tuning and don't get on the throttle everywhere you go then it should last for a long, long time... boost is addictive though, so you'll end up cranking the boost or screwing with the tune and blow the engine, it's a fact you'll blow your engine.

Re:How many of you have blown your motor with your HMT?
 

too broke to blow an engine...

Re:How many of you have blown your morot with your HMT?
 

aaaaah ive been boosting 10psi for a long time on my z6
and pat(beerbongskickass) has been boosting 10psi for about a year now

Re:How many of you have blown your motor with your HMT?
 

running uberdata?
what else have you tuned? <-is this a dumb question?
doesnt uberdata take care of your fuel management? and of coarse you have to play with your timing, what else to tune>

Re:How many of you have blown your motor with your HMT?
 

i've been running a Y8 on 8psi for almost 20,000 miles and it's running strong. AFC/450's street tuned.

Re:How many of you have blown your motor with your HMT?
 

im plannin on blowing my z6 running 10psi daily on hondata, i have a d15b and another d16z6 ready to go when this one goes, so iont giveaaa fukkk

Re:How many of you have blown your motor with your HMT?
 

it must be nice. I have one motor+no money= SOL when mine goes if it ever does. I guess I'll just have to not rape is da in and day out. :)

Re:How many of you have blown your motor with your HMT?
 

find another engine for dirt cheap, and then RAPE yours. thats what im gonna do!

Re:How many of you have blown your morot with your HMT?
 

lol.. pats been boosting for like 4 months.