how many bolts are needed?? Cell phone quality pics
8 Attachment(s)
In good faith http://bayimg.com/JAmDIAABL
http://bayimg.com/jAMDjAaBl http://bayimg.com/JaMdMaAbL Are all the bolts needed to secure the downpipe to the turbo? Downpipe (standard 5 bolt): Attachment 11342 Turbo (Nissan t3 z31 style 7 bolt): http://i373.photobucket.com/albums/o...sLudin/051.jpg Turbo vs DP: Attachment 11343 This is the flange that I should use, but i'm not paying $29 for a flange from blaast... Attachment 11344 the only 2 bolt/holes that line up: Attachment 11345 Attachment 11346 Attachment 11347 Attachment 11348 Attachment 11349 Weir doesn't have the flange. I was wondering if I could get away wit drilling the dp flange and holding it wit 4 bolts? I know I can get 4 to bolt up, but would the heat affect the sealing? Its just gonna be an open dump to get heat out of the engine bay. The DP came from the same guy i got the manifold from. He was using a turbonetics t3/t4, and i'm using a t3 with a goofy ass flange. I wanna use this DP so I don't have to have this ---- welded for me cuz i'm a :1 with no welder |
Re: how many bolts are needed??
you'll more than likely have exhaust leaks
exhaust leaks affect afr readings for tuning depends on how much you care |
Re: how many bolts are needed??
there different types of 5bolt downpipe flanges...
search for 'what 5bolt flange is this' or something like that |
Re: how many bolts are needed?? Cell phone quality pics
Should be fine with 4 bolts, might have a tiny leak
|
Re: how many bolts are needed?? Cell phone quality pics
soda can gasket with the copper spray. And I was figuring an o2 bung for the wideband less than 12" from the turbo.
I'm aware exhaust leaks will mess up A/F readings. Is there a minimum length the dp has to be to not mess with a/f readings? or as long as its reading all the exhaust gas coming out of the turbine it will be fine? |
Re: how many bolts are needed?? Cell phone quality pics
quit being a O0 and buy the 29 dollar flange. What's wrong with you? :l
|
Re: how many bolts are needed?? Cell phone quality pics
Originally Posted by 89hatchsir
quit being a O0 and buy the 29 dollar flange. What's wrong with you? :l
|
Re: how many bolts are needed?? Cell phone quality pics
not quite O0
But... i've gotta be the most mexican looking chinese/german ever :S and no...mom wasn't banging the gardener/milkman/garbage man.... lol I guess i'll just take it like a man and buy the damn flange.... Does Blaast do any HMT discounts? I guess i'll just ask him |
Re: how many bolts are needed?? Cell phone quality pics
I ran a flange complex and I torched out of a toyota bumper and cleaned up with a grinder. It sealed ok until I took it on and off a few times and started snapping bolts. I have a new flange I've been too lazy to put it on.
Like I said it depends on how much you care |
Re: how many bolts are needed?? Cell phone quality pics
Originally Posted by stenseltizm
I ran a flange complex and I torched out of a toyota bumper and cleaned up with a grinder. It sealed ok until I took it on and off a few times and started snapping bolts. I have a new flange I've been too lazy to put it on.
Like I said it depends on how much you care |
All times are GMT -5. The time now is 04:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands