How to make a collector/merger.
#11
Re:How to make a collector/merger.
Originally Posted by sccaeg
and the best thread to making your own mani...
http://www.honda-tech.com/zerothread?id=956666
http://www.honda-tech.com/zerothread?id=956666
I'm in the process of getting the materials together for this project. I'm trying to find a shop in my area to cut the tubes for the collector.
I would think that this design would bottle neck the exhaust gases through that opening. To elleviate this, after you have the above manifold done, take 2-3 mms off of the bottom of each tube to make its opening larger in order to match your turbo flange.
QUESTION:
At the bottom of each tube. Your roughly ending the cut in the center of the tube correct?
Andrew
#12
Re:How to make a collector/merger.
it is a bitch to cut these unless you have a good band saaw that you rails and ---- on....
but you can pretty much do it with a grinder or something and then just lay a fatty weld over it...
weld that ---- as hot as you can and dont make it look like bird ----.
but you can pretty much do it with a grinder or something and then just lay a fatty weld over it...
weld that ---- as hot as you can and dont make it look like bird ----.
Thread
Thread Starter
Forum
Replies
Last Post
HMT-Roger
Auto News
0
01-07-2012 08:33 AM
W O T
Forced Induction
5
10-21-2004 11:42 AM