crx4life2003

I need to know how.....i thought about a crossmember? What do i have to cut? I want to fit a fluiyne in my crx. How did u do it..pics?

draztik

---- your hood up and have the hood latch thing not connected and just push it up to connect it to the hood... or else the top of the radiator cap is going to hit the hood....

88dx

just cut a little out of the radiator reinforcement on the bottom so it sits a little lower and make a custom mounting bracket for the top. It will still be kinda titled back but you will be able to keep your stock latch.
steve

sohcrxsi

doesnt someone make a half radiator for the 4g civic

98ctr

you can make it fit HMT style. lower the bottom brackets or make a longer bracket for the top and keep the radiator at an angle. 98ctr

crxrx7

I saw one that they used the passanger side stock bracket on top and just cut the bottom bracket out the length of the radiator then made custom brackets for the bottom. If you cut it out nice on the bottom you can make it look like it was ment to be there. Just go to the junk yard to find a stock bracket for the top driver side then you got it made.

R-MAK

does anyone have a half rad ? does your car over heat quicker or is it the same as a regular rad ?

crx4life2003

my provlem is the crossmember...thats what it hits. Half radiators suck esp single core

98ctr

get a del slow dual core and angle that biatch and make it fit. 98ctr

y49crxsi

If your getting a nice racing radiator, i know c&R makes a half size for teh 4th gens, dont know about fluidyne, but they should....