HomemadeTurbo - DIY Turbo Forum

General Discussion Off-Topic Discussion and Enlightenment

hoses

Thread Tools
 
Search this Thread
 
Old 06-19-2005, 11:57 AM
  #1  
1.5 BAR
Thread Starter
 
ibby's Avatar
 
Join Date: Dec 2003
Posts: 918
Default hoses
what are those hoses called on the back of the manifold (intake mani).....

Also whats the diffrance between d15b7 pistons and d16z6 pixtons ?
ibby is offline  
Reply
Old 06-19-2005, 02:35 PM
  #2  
0.0 BAR
 
IndianRide's Avatar
 
Join Date: Nov 2004
Posts: 0
Default Re: hoses
fuel lines or vaccum lines how about a better description.
IndianRide is offline  
Reply
Old 06-19-2005, 03:58 PM
  #3  
3.0 BAR
 
Ravage70's Avatar
 
Join Date: Jan 2004
Posts: 5,933
Default Re: hoses
vaccuum hoes
Ravage70 is offline  
Reply
Old 06-19-2005, 03:59 PM
  #4  
3.0 BAR
 
BoosTedZSix's Avatar
 
Join Date: Jan 2004
Posts: 5,708
Default Re: hoses
b7 pistons are domed and z6 pistons are dished yO!
BoosTedZSix is offline  
Reply
Old 06-19-2005, 05:36 PM
  #5  
1.5 BAR
Thread Starter
 
ibby's Avatar
 
Join Date: Dec 2003
Posts: 918
Default Re: hoses
is that why the z6 makes higher compression ?
ibby is offline  
Reply
Old 06-19-2005, 05:38 PM
  #6  
HMTguy
Guest
 
Posts: n/a
Default Re: hoses
Domed pistons make higher compression in the same motor as opposed to dished pistons which will lower compression. So it must be something else.
 
Reply
Old 06-19-2005, 06:57 PM
  #7  
1.5 BAR
 
boosted_hatch_216's Avatar
 
Join Date: Mar 2005
Posts: 728
Default Re: hoses
they are different cc's, the z6 is 34.6 and the b7 is 38cc.
boosted_hatch_216 is offline  
Reply
Old 06-20-2005, 05:32 PM
  #8  
1.5 BAR
Thread Starter
 
ibby's Avatar
 
Join Date: Dec 2003
Posts: 918
Default Re: hoses
so which stock d series pistons yeild a high compression ratio ?
ibby is offline  
Reply
Old 06-20-2005, 11:53 PM
  #9  
1.5 BAR
 
1337's Avatar
 
Join Date: Dec 2002
Posts: 1,060
Default Re: hoses
just put sand in the intake, when it gets in the combustion chamber it fills up the pistons and makes them higher compresion, not to mention you will also have a nice layer of silicone protection on the top of your pistons
1337 is offline  
Reply
Old 06-20-2005, 11:57 PM
  #10  
1.5 BAR
 
boosted_hatch_216's Avatar
 
Join Date: Mar 2005
Posts: 728
Default Re: hoses
pm7's put of a dohc zc or the p29's out of d16a1-8-9, any dohck d16 piston will make high compression in a sohc d motor. why you planning on an all motor build or what?
boosted_hatch_216 is offline  
Reply



Advanced Search
Quick Reply: hoses


Reply Closed Thread Share

All times are GMT -5. The time now is 10:09 PM.