J-SMITH69

spray it down with something

use a big *** breaker bar on it.

they are a pain but ive gotten them off everytime

scottsi

impact gun, air tools, get them

ryan89crx

i think he might mean cheater-pipe

ive always used an impact gun and have never had an issue getting the bolt off on several different motors

ichbinsobose

1slow91

hit that bitch with a torch and then the cheater/breaker bar and that ****** will be off

J-SMITH69

that works too

i forgot that i took my last one to a shop where they worked on tractor trailers. he said he had his air system "illegally" at 1000psi

said itd shatter or come off, and it came off lol

asianpoet

i use a cheater pipe on my breaker bar for added leverage. which is the bar for my floor jack

B16MIKE

USE a 17mm impact socket with breaker bar w/cheater pipe over that.Use a chain wrench to wrap around the crank pulley to keep it from turning and go to work.

JDMFantasy2K

here it is

get a jack and a block of wood, position it in front of the brake assembly. Hold the flywheel good. Get like a 10" extension, longer is better, good socket, then get a good half inch ratchet or breaker bar and throw a pipe on it. Gauranteed to work or break something

Jorsher

like the other guy said i meant a cheater bar, i had a pipe on a ratchet, ---- technicalities.

Like i ------- said I've done it many times before and never had this much trouble. This ones being a bitch. It broke a goddamn craftsman socket.

Now I have a new socket, a 1/2 breaker bar, and a cheater pipe and am about to go at it with a torch. Hope you feel better now that I'm using the proper terminology.