Hole cutting bit
 

Ive been looking around for a hole cutting bit to use for my BOV. Everything ive come across is made for wood. I wasnt sure if I should try one of these out or not. Also now thanks to this site, I just bought a welder. Pretty pumped that I dont have to ask a friend of mine to weld my stuff anymore! (though im pretty sure my first welds are gonna come out like total ----.

Thanks, you guys kick ass,
Tom

Re: Hole cutting bit
 

thw wood ones dont work ;)

Re: Hole cutting bit
 

homedepot nigga, blue mol bimetal hole saw 1.5 inch unit.


now get a rope for being ignorant

Re: Hole cutting bit
 

go ahead and try out the one for wood tsk tsk tsk. get some earplugs though, it will sound about 38525689 times worse than fingernails on a chalkboard, get a gas mask too, cuz it's gonna stink. make sure you wear goggles cuz ----'s gonna fly.

don't worry about clamping down the metal though, just hold it with your hand, haha

but seriously, clamp it cuz you won't need a rope if you don't
__________

all of the above was total crap and i really hope you don't try it, but post a video or pics if you do

Re: Hole cutting bit
 

a bimetal holesaw will work like butter, wtf are you talkign about. dumbass.

ive cut 12 wg holes in sched 10 stainkless with the same holesaw

Re: Hole cutting bit
 

Plasma cutter for teh win!

Re: Hole cutting bit
 

if you're calling me a dumbass, i only meant that the above of what i said was crap. bimetal will probably work good, as long as it's got alot of tpi, it should work fine

Re: Hole cutting bit
 

This one is for metal
http://rds.yahoo.com/S=96062883/K=me...al/Bimetal.jpg

This one is for wood
http://rds.yahoo.com/S=96062883/K=wo...lesaw_wood.jpg

Idea: get a wood hole saw bit.. and a pretty powerful drill.. and if it's your first time using one.. your arm will enjoy the experience..lol

Re: Hole cutting bit
 

The closest home depo is almost an hour away, so I didnt particularly want to drive there for that one thing. Ive checked a bunch of local small hardware stores w/ no luck (and the guy at Lowes says they dont make them? ::)). Guess ill just suck it up and take a drive. At least that way I can pick up a few spare silicone connectors and maybe some extra fittings.

Thanks for the help
Tom

Re: Hole cutting bit
 

The guy at Lowes is a tool also, they have them that is where I get mine. I think the are Irwin brand.
http://www.eville140.com/lowes.jpg
I notched every tube on the cage in my caar with one bit, they will last a long time if used in a drill press, if using a hand drill they tend to wear out a bit quicker. But they are much more fun to use with a hand drill :)

Later
Randy