|
HMT Style Engine destruction!
D15B7 at 140mph @ 8psi at WOT
http://images.cardomain.com/member_i.../607750_11.jpg :o http://www.cardomain.com/id/dj0820derek |
Re:HMT Style Engine destruction!
i got some d16z6 and a6 pistons /rods for sale :-)
Nick |
Re:HMT Style Engine destruction!
actually im gonna spring for a set of Suzuki Vitara pistons and aftermarket rods. Vitara pistons handle about 15-20 psi and they have free floating wrist pins so you can use aftermarket D series rods with them with no modifications :)
|
Re:HMT Style Engine destruction!
did you trash the block?
|
Re:HMT Style Engine destruction!
it has 2 holes in the front of it, one of them "I" shaped like the cross-section of a rod. it's neat
|
Re:HMT Style Engine destruction!
|
Re:HMT Style Engine destruction!
Nice job dipshit ;) lmao
|
Re:HMT Style Engine destruction!
yeah, I would have been really suprised if that aluminum block could withhold those pistons flying apart.
|
Re:HMT Style Engine destruction!
You should buy my A6 block :P
|
Re:HMT Style Engine destruction!
now thats what i call bad management
|
Re:HMT Style Engine destruction!
no, not bad management. try extreme engine load. the ring lands are perfect, so no severe detonation.
|
Re:HMT Style Engine destruction!
well those are known to be the weakest engines
|
Re:HMT Style Engine destruction!
will susuki vitara pistons fit in a d16?
|
Re:HMT Style Engine destruction!
the block can be fixed cant it?
|
Re:HMT Style Engine destruction!
wow derek, never thought you would post back up on HMT.. lol, you were one of the first few to register here.
Nice job on the disposable D! ;D |
Re:HMT Style Engine destruction!
Originally Posted by Spenser
will susuki vitara pistons fit in a d16?
Originally Posted by kain
the block can be fixed cant it?
I bought that engine for $40 w/tranny and engine wiring harness anyways. |
Re:HMT Style Engine destruction!
werd Jeff, i had to rep my blown d series Abaz style ;)
and wow, i registered 3 days after you did. :o i'm impressed with myself. |
Re:HMT Style Engine destruction!
But you're still a llama ;) ;D
|
Re:HMT Style Engine destruction!
im not u made 12 posts 4 in this thread in 3 years
|
Re:HMT Style Engine destruction!
so just one piston shredded apart.. did the thing still want to idle over?
|
Re:HMT Style Engine destruction!
Originally Posted by DJ0820
I bought that engine for $40 w/tranny and engine wiring harness anyways.
|
Re:HMT Style Engine destruction!
yo, i think i'm gona use the suke pistons in my motor, are they cheap?
|
Re:HMT Style Engine destruction!
the car wouldn't run. the sad thing is i only had the car running for like a week after it had sat since last august. and i only had the turbo on for less than 24 hours :'( but i still pulled hard on my friends modded supercharged vw g60 corrado 8)
hells yeah the suzuki pistons are cheap, some guy on honda-tech is selling them for $110 with a set of hastings rings. |
Re:HMT Style Engine destruction!
Originally Posted by Ravage70
im not u made 12 posts 4 in this thread in 3 years
|
Re:HMT Style Engine destruction!
So what forums do you browse Derek? Havent been around in a long time.
|
Re:HMT Style Engine destruction!
ah, i usually just lurk here and at honda-tech.
i do post regularly on a local street racing message board. www.crunderground.com its funny ---- i'll probably start posting more here. |
Re:HMT Style Engine destruction!
lol, ya right.. See ya next year man ;)
|
Re:HMT Style Engine destruction!
hehe, i'll keep you guys up to date on the vitara piston d16 buildup
|
Re:HMT Style Engine destruction!
I think thats what I am going to do once I blow my engine. Yeah you could fix that engine (jb weld) but why.
|
Re:HMT Style Engine destruction!
no one fixes an engine with jb weld...actually that sounds like something i would do.
|
Re:HMT Style Engine destruction!
I have seen it done. for some reason it works for a while. It would work on that hole. Just as a plug. You could do it just to see if it would work. The block was $40. Why not?
|
Re:HMT Style Engine destruction!
if ya get those vitra pistons and get aftermarket rods do u still gotta "notch the block" still havent even found out what that means anyways
|
Re:HMT Style Engine destruction!
Any time you use aftermarket rods that are thicker than stock you should notch the block.
Block notching is just shaving a little bit off each side at the bottom of the cylinders so the larger rods don't come into contact with the edge of the cylinder wall at the bottom. Here is a pic of what it looks like: http://www.theoldone.com/articles/d_...0Block%203.jpg |
Re:HMT Style Engine destruction!
---- that ---- blew up....hhaha thats funny. im glad mine didnt do that. but good luck with the suziki pistons. what are u gonna do about that compression that it gives? 8.5:1
|
Re:HMT Style Engine destruction!
Originally Posted by BoosTedZSix
---- that ---- blew up....hhaha thats funny. im glad mine didnt do that. but good luck with the suziki pistons. what are u gonna do about that compression that it gives? 8.5:1
|
Re:HMT Style Engine destruction!
Originally Posted by DJ0820
Originally Posted by BoosTedZSix
---- that ---- blew up....hhaha thats funny. im glad mine didnt do that. but good luck with the suziki pistons. what are u gonna do about that compression that it gives? 8.5:1
|
Re:HMT Style Engine destruction!
i need a d16, anybody got one?
|
Re:HMT Style Engine destruction!
I have one.. it's in my engine bay.. it's not for sale ;)
I think Sinister is selling his though since he decided to save some furry woodland creature and fucked up his rex. |
Re:HMT Style Engine destruction!
HAHA. Funny. I saw something of the corner of my eye and hit the brakes. It was a reaction.
PMed you, DJ0820 |
| All times are GMT -5. The time now is 07:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands