HMT-Admin

Video UP

Right-click-save-as:
http://www.draglab.com/leed/HMT TrailerPark.wmv


Well, it has been a very long past 2 days.. This is how it started, Pat (Beerbongskickass) came up to my place last night so we could install a new clutch and DSM 450cc injectors on his car. While Dave (leed) chipped his ecu w/ uberdata. After we got things all settled up last night we decided to head down to a local street racing meet about ~35 miles away. (since the forcast was looking bad for today) So we have 3 cars down there, Travis in his RX7, me in my POS and Dave brang down his Turbo b16a crx. There was definatly some good racing going on, (btw dave your car rips ) I just got done a race and decided to pull a ebrake slide into a parking spot and "chizam.." just like that my car was making a god awful noise. It was difficult to tell where it was coming from, but the car wasnt moving I thought I either broke something inside the tranny or an axle. Got a tow truck (3am) towed it to my work, and found out the splines on the driverside axle sheared off. (5am) Go home take a quick nap before the dyno. Head to pep boys (8am) and throw a new axle in, and were ready to go!

The dyno went pretty decent today, we were suppose to have a few more guys show up but they never showed. I list the setups the best I can.

Dave (leed)
1991 Honda Crx SI
Turbo B16a w/ ITR Pistons (stock/stock)
ITR Intake manifold
ITR Cams
JG Cam Gears
Custom Turbo setup running 14psi
T3 .60/.63
2.5DP w/ 3 exhaust / 2.5 charge pipes
Custom Coach IC
RPS Turbo Clutch
Hondata

277whp / 211tq

- Dave's car rips real good, it was a little scary on the dyno on a few pulls, could hear some pinging going on, but is now all cleared up. **I got a big stiffy on dave's truck shifter in his crx**

Pat (beerbongskickass)
1995 Honda Civic EX
Turbo D16z6 (stock)
Custom Turbo setup running 10psi
T3 .60/.48
3.0 exhaust / 2.5 charge pipes
Tyrus 5in IC
ACT XT/SS Clutch
Uberdata

216whp / 181tq

-Pats car turned out ------- great, I really cant beleive how well it did, I think its a great combo of parts. Luckly I let him borrow him Tial BOV and Dustin let him borrow his MBC otherwise he kinda would be SOL! Good job pat!

Dustin (turbohf)
1988 Honda Crx HF
Turbo B18a (stock)
Custom Turbo setup running 11psi
T3 .60/.63
3.0 exhaust / 2.5 charge pipes
Tyrus 6in IC
ACT XT/SS Clutch
Turboedit 2.0

198whp / 216tq

As always the B18 came out with the most torque of the day. Dustins car actually made a bit more horsepower on a previous dyno day what? (206whp?) Boost wasnt holding very good.

--------------------////////--------------------

Brace yourself for some real power, hahahaha

Jeff (AbaZ)
1989 Honda Crx Si
Trailerpark B16a (worse than stock)
Custom ITB Setup 42mm Suzuki GSR Throttle Bodies
GSR Cams
3 1/2-1 header
2 1/4 Greddy Exhaust
ACT XT PP / GSR Disc
Zdyne

152whp / 112tq

Ok, there are no excuses, Other than beating the ---- out of it lately and its starting to smoke now. I really thought it would be in the 160's or almost 170's but no... I guess I dont know how to "feel" the all motor power. Oh well my fuel map I made street tuning was god damn near perfect on the dyno. (remember this motor was completely seized when I got it) - Excuse :P

Beau (BLACKSI)
1990 Honda Crx DX
Joe Dirt Turbo ZC (stock)
Custom Turbo setup running 15-7psi ya..?? spring setups rule!
TC05a mitsu Turbo (spring WG)
2.5 exhaust / 2.0 charge pipes
No Intercooler
Factory PP/ACT 4PUK Race Clutch
Zdyne

148whp / 154tq

Beau probably would have beat my *** on the dyno if his boost would hold, it was floating all over the place from 15-7psi, it would never stay still. The "Spring wastegate" does have its disadvantages I beat beau in the HP catagory, but we had a little street racing, and our cars are almost identicle.. I can get him out of the hole, but on the top end he blows by me. Both really really low budget hack job setups that did pretty decent!

The OCB was great... Glad Jay came down even though he didnt run. It would have been fun if we could have gone racing afterward like planned, but living in the great NW, sometimes that just doesnt happen :/

Dont ask for pics, because I didnt take any! Dave has some video footage, and Pat has some pictures that I will be uploading later on tonite.

Jeff

jake2001z001

cool ---- , nice to see soem number come out of some of these cars, leeds car must own like a son of a bitch

Dr.Boost

Very cool. Those are some surprising numbers. Pats car did ------- good from the sounds of it. Nice work. I want to see some pics/video.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

BLACKSI

it was the G-gerth manifold on pats car that did it all

Beau

tranceminister

Nice you guy's! I was wondering when we were gonna start seeing some numbers of the ITB setup. Sounds like it was a good time.

woodywoodruff

Pat just called me telling me about it...I cant wait tell i get to rid in it

d16forlife

Hope mine does as good.---- that!Im gonna run 10psi dailey too.God Job Pat!!

crx2fast

OnYx