HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   here is a good vid of some nw street racing (https://www.homemadeturbo.com/general-discussion-6/here-good-vid-some-nw-street-racing-58841/)

chevy 04-03-2006 12:09 AM

here is a good vid of some nw street racing
 
http://www.itrspec.com/VIDS/ITR/KnowYourEnemy_low.wmv


enjoy!!!

W O T 04-03-2006 12:16 AM

Re: here is a good vid of some nw street racing
 
Thats a pretty good video

Whatever car that was at the end ------- pulled to 140 ------- quick

chevy 04-03-2006 12:20 AM

Re: here is a good vid of some nw street racing
 
its a good vid

88dx 04-03-2006 12:28 AM

Re: here is a good vid of some nw street racing
 
Sweet vid

salesmonkey 04-03-2006 05:31 AM

Re: here is a good vid of some nw street racing
 
could of edit a lot of the stuff out but the end is pretty much worth watching because it was funny seeing that guy get smoked for ten bucks.

alfaaay 04-03-2006 05:43 AM

Re: here is a good vid of some nw street racing
 
For a second there I thought that said a good video from "nwstreetracing" ...aka the local ricer site. Anywho, yeah the video is pretty sweet. I'm pretty sure the red EH in it has a K24 swap, and the ITR is a 2.0L low-mid 200 whp-ish car, and the last one, well, I'm not sure, but ----, it's damn fast. Haha, dude couldn't even pay the full $10.

HondaTuner 04-03-2006 08:41 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by alfaaay
Haha, dude couldn't even pay the full $10.

That was good ;D That last car was QUICK...

BoosTedZSix 04-03-2006 09:04 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by W O T
Thats a pretty good video

Whatever car that was at the end ------- pulled to 140 ------- quick

it was a 96+ hatch.

USS 04-03-2006 09:19 AM

Re: here is a good vid of some nw street racing
 
Was that other car racing in the last video?

idiot-stick 04-03-2006 09:26 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by SinisterCRX
That was good ;D That last car was QUICK...

Damn straight :y

BoosTedZSix 04-03-2006 09:27 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by Snafubmx234
Was that other car racing in the last video?

i would say so otherwise he wouldnt have coughed up the money. I am assuming the 240 has close to 250 whp and the hatch had 500+ whp. Which is why they had the quote before they raced

Xgenturbo 04-03-2006 09:30 AM

Re: here is a good vid of some nw street racing
 
What is the setup of the last hatch? and is it me or does everyone in the video have HID's?

Tatakai 04-03-2006 09:36 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by Xgenturbo
What is the setup of the last hatch? and is it me or does everyone in the video have HID's?

HID's are becoming reeeaaaly popular here, at least in the seattle area. i'm going to be picking up some 8000k's soon O0

but that is a pretty sweet vid. my shorts got a lil wet seeing the k24 hatch.. it sounds just like my GSR and my traction is about the same in 2nd, lol

fourthgenhatch 04-03-2006 09:41 AM

Re: here is a good vid of some nw street racing
 
that was a very good video, finally someone who can hold a camera steady, those were some really nice cars tho ;D

chevy 04-03-2006 05:20 PM

Re: here is a good vid of some nw street racing
 
that last hatch is a boosted h22

Schister66 04-03-2006 07:26 PM

Re: here is a good vid of some nw street racing
 
that's a killer video

dai the flu 04-03-2006 11:13 PM

Re: here is a good vid of some nw street racing
 
that h22 hatch is ------- faaaaaaaaaaast. and that k24 hatch sounded sexy.

Random Hero 04-03-2006 11:19 PM

Re: here is a good vid of some nw street racing
 
I built the turbo setup and tuned that last hatch that rails

its a bone stock h22a (usdm)

bone stock ignition
403hp 320 torque 19psi STOCK ENGINE pump gas
sc61
Ramhorn manifold a buddy and I made
3 inch charge piping
3inch ebay 200dollar intercooler
2 1/2 inch downpipe that was bottomed out so hard it looked like it was maybe 2 inches MAYBE
46mm wastegate
tuned with power FC

Tatakai 04-04-2006 12:06 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by Random Hero
403hp 320 torque 19psi STOCK ENGINE pump gas

is he suicidal or does mommy and daddy have money? (and he's spent $0 for/on his car)

RedCavz 04-04-2006 12:07 AM

Re: here is a good vid of some nw street racing
 
3" charge pipes, holy ----

swartz 04-04-2006 12:40 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by Random Hero
I built the turbo setup and tuned that last hatch that rails

its a bone stock h22a (usdm)

bone stock ignition
403hp 320 torque 19psi STOCK ENGINE pump gas
sc61
Ramhorn manifold a buddy and I made
3 inch charge piping
3inch ebay 200dollar intercooler
2 1/2 inch downpipe that was bottomed out so hard it looked like it was maybe 2 inches MAYBE
46mm wastegate
tuned with power FC


stock pistons rods and comp are going to hold 19psi?

xternal 04-04-2006 06:29 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by swartz

stock pistons rods and comp are going to hold 19psi?

Yeh hard was wondering the same thing , :3

Random Hero 04-04-2006 07:02 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by swartz

stock pistons rods and comp are going to hold 19psi?

yes and have been for over 8 months of HARDCORE rapage. He beats the living ---- out of it. Its all in the tune my friends. ended up with 14 degrees of timing @ 19 psi in vtec.

when we put the boost controler on it was broken and it spiked to over 40 psi 3 times, it sounded so crazy and register the torque over 600. it was the craziest sound i have ever heard. There is no way he could have ever pulled his foot off fast enough.

Random Hero 04-04-2006 07:03 AM

Re: here is a good vid of some nw street racing
 
And no, he paid for everything. He worked down at intec with me so he got cost on all the parts... I think including the turbo/intercooler/injectors he was only into the whole setup 1300. the rest was all shop ---- laying around and he used my power FC

BoosTedZSix 04-04-2006 09:10 AM

Re: here is a good vid of some nw street racing
 

Originally Posted by Random Hero
Its all in the tune my friends. ended up with 14 degrees of timing @ 19 psi in vtec.

:y , not very many people know how to tune these things. they blow it up on low boost and think the motor just sucks ^-^

Tatakai 04-04-2006 10:58 PM

Re: here is a good vid of some nw street racing
 

Originally Posted by Random Hero
yes and have been for over 8 months of HARDCORE rapage. He beats the living ---- out of it. Its all in the tune my friends. ended up with 14 degrees of timing @ 19 psi in vtec.

when we put the boost controler on it was broken and it spiked to over 40 psi 3 times, it sounded so crazy and register the torque over 600. it was the craziest sound i have ever heard. There is no way he could have ever pulled his foot off fast enough.

whoever tuned it is a god. wasn't full race's pink PINKS civic on like 40psi stock sleeves?

catch.can 04-04-2006 11:09 PM

Re: here is a good vid of some nw street racing
 
lol tataki, the same dude you quoted tund it, way to give him a big head. gawwddd idiottt

random where is intec, mabey il have to pay you a visit when my build is done, u allready saw the thread. sex table build.

noboostedEGo 04-04-2006 11:20 PM

Re: here is a good vid of some nw street racing
 
One of the best race videos I've seen lately. The k24 hatch, 2.0l ITR, and of course the h22 hatch all gave me huge grins. Sweet.

Tatakai 04-04-2006 11:26 PM

Re: here is a good vid of some nw street racing
 

Originally Posted by hatchboy
lol tataki, the same dude you quoted tund it, way to give him a big head. gawwddd idiottt

random where is intec, mabey il have to pay you a visit when my build is done, u allready saw the thread. sex table build.

oh.. right. lol. i was gonna have him tune my turbo setup.. until i threw it all away :X

google in "intec racing" it'll be the first one. its in Kent. from southcenter, go south on southcenter pkwy, left onto 188 (or 180.. the like 3 lanes all turn left and 1 goes to the right), right on west valley hwy, and a left on 212th. its like a block down, on the right, in a building with a couple other stores in it.

bigdaddyvtec 04-04-2006 11:45 PM

Re: here is a good vid of some nw street racing
 
I know the camera mans laugh anywhere.......

Sup c,

Spiker O0

Random Hero 04-04-2006 11:56 PM

Re: here is a good vid of some nw street racing
 

Originally Posted by hatchboy
lol tataki, the same dude you quoted tund it, way to give him a big head. gawwddd idiottt

random where is intec, mabey il have to pay you a visit when my build is done, u allready saw the thread. sex table build.

I dont tune for intec unless someone requests me you can pm me and i can set up a time for you. I also tune for 50$ less than intec @ intec. so its 100 an hour if you go through me and 150 an hour to go through them. Personally I'd recommend myself, I make absolutly no money off of it. I just actually know how to tune. abvously I'm one of few that have made over 400 hp on a stock h22 with such a simple setup.


All times are GMT -5. The time now is 12:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands