USS

I ran a hard line for my new computer, since my plaster walls didn't like my wireless router. I ran the lines, hook it up, but my computer won't recognize it. I plugged my laptop into it, and boom, it's fine.

I have a Biostar Gforce 6100-M9 motherboard with an integrated Realtek RTL8201BL on duty for the connection. I've looked through all the software given to me (drivers) with the components, but I have found nothing for this ******. I've also hit up google with no avail. Any other suggestions?

udaredme

i had the same problem..i went and picked up a ethernet card from wally world..fixed it for me..my onboard ---- never worked

turbocivic6776

did u install the drivers for it??

USS

Did you read my post? :1

turbocivic6776

My bad
http://www.biostar.com.tw/support/dr...%206100-M9&os=
Why doesnt it show a driver for the ethernet controller also if you look under driver download for the realtek ethernet drivers it doesnt have that model #

turbocivic6776

I dont know, what does it say when u go into the device manager and you go to network adapters? does it show up there?

michigan_soler

+1 they are like 10 bucks, max for one and they are all the same. so just do that.

USS

It just shows my wireless card when I go into the device manager. I think I'm just going to buy a cheap card later today and be done with it.

tundrafiend01

Your onboard lan may not be enabled. Try going into your bios and see if it's enabled or disabled. Also, check under Other Devices in Device Manager to see if your onboard lan is listed.

jinxy

mmhmmmm