HELP!!!!! CAR WONT START!
#1
HELP!!!!! CAR WONT START!
My car wont start. I just finished my setup. its a 93 civic with a B18A1 (from 90 integra) 98 GSR 5 speed. Did auto to manual conversion also. I have a brand new battery, Pretty sure everything is hooked up right, but when i turn the key forward to start it, the starter clicks once, and thats it!!!! Please help, must finish this car before end of the weekend!
Heres stuff I've done:
I spliced the 2 fat wires together , and the black wire with green wire w/white stripe (for auto to manual conversion)
Also removed the little blue box under the dash (blue interlock box or something)
Had Chris (moderator) chip my ecu, and convert it for manual trans.
Using OBD0 starter - it worked before pulled, but could that be my problem..??
Heres stuff I've done:
I spliced the 2 fat wires together , and the black wire with green wire w/white stripe (for auto to manual conversion)
Also removed the little blue box under the dash (blue interlock box or something)
Had Chris (moderator) chip my ecu, and convert it for manual trans.
Using OBD0 starter - it worked before pulled, but could that be my problem..??
#5
Re: HELP!!!!! CAR WONT START!
It lives! I tightened the battery cable, added a ground, and hit the remote start. it cranked 3 times and fired up!!!! I still cant shift though, I'm gonna go out and try to get some pressure in the clutch now. I'll post a vid or some pics later.
#6
Re: HELP!!!!! CAR WONT START!
Well I got some clutch now, i drove and it did alright. kinda sluggish, i dont have the throttle cable bolted up so i wasnt getting it all, I have hellacious exhaust leaks, and no O2. Plus, this freaked me out.... When I shut off my car, my remote start immediately starts cranking the starter. so i have a wire wrong, so i'm just going to disconnect it. I dont have my clutch all the way done i guess cuz i dont have reverse yet, had to push it outta the driveway. Pics will be up after i eat