havent posted in a while so here's my pic's
 

here's a pic of one of my two eg hatch's
the black one is a ls/vtec with cp 9:1's and renotched ls eagle rods with gsr bearing's
running a sc61..

http://home.comcast.net/~boostedeg/w...2/site1020.jpg

http://home.comcast.net/~boostedeg/w...2/site1019.jpg

http://home.comcast.net/~boostedeg/w...2/site1021.jpg

http://home.comcast.net/~boostedeg/w...2/site1022.jpg

http://home.comcast.net/~boostedeg/w...2/site1025.jpg

here's my little red hatch its running a b16a with a 00' gsr head with wiseco 9:1 on eagle rods
runnig a awsome t3/t4

http://home.comcast.net/~boostedeg/w...2/site1024.jpg

http://home.comcast.net/~boostedeg/w...2/site1026.jpg

http://home.comcast.net/~boostedeg/w...2/site1027.jpg

http://home.comcast.net/~boostedeg/w...2/site1028.jpg

http://home.comcast.net/~boostedeg/w...2/site1029.jpg

http://home.comcast.net/~boostedeg/w...2/site1030.jpg

Re: havent posted in a while so here's my pic's
 

lucky fucker

Re: havent posted in a while so here's my pic's
 

how much power does that red hatch make?.....and how many pounds are you running

Re: havent posted in a while so here's my pic's
 

the red one put down 286hp and 262tq on 14psi with maxed out 450's and a maxed out map sensor at 7000rpms

Re: havent posted in a while so here's my pic's
 

how much power does the sc61 one make

Re: havent posted in a while so here's my pic's
 

The black hatch with the sc61 put down

437whp @ around 8200 rpms.. but the pickup on the dyno (intec) was not reading right. so we also dont know what torque it was at

done at 21ish psi on PUMP gas.

Re: havent posted in a while so here's my pic's
 

wanna trade a perfectly stock 93 si with 166000 miles....black on black 5 speed just painted a few months ago...no rust......for that red hatch...

Re: havent posted in a while so here's my pic's
 

titties, u guess thats what i woulda made if i had a 1.8 lower end. sweet.


cant wait to redyno and shoot for 500 on some race gas and the built head cams and ---- combo. 8)

Re: havent posted in a while so here's my pic's
 

what kind of an offer is that??? ::)

Re: havent posted in a while so here's my pic's
 

shut up josh.. This was made on a semi log manifold.. with s SUPER small intercooler. wait until he puts on a ramhorn and a bigger itnercooler, this setup is easy 500whp on PUMP stock sleeves.


wait until he gets injectors on his red hatch, hes going to beat your 400whp with a LOG manifold.. and hes under 1200 including turbo kit and his whole motor