hah. hahah. sigh. hate the cams.
|
Re:hah. hahah. sigh. hate the cams.
now doesnt that just suck.
|
Re:hah. hahah. sigh. hate the cams.
what did you forget to torque?
|
Re:hah. hahah. sigh. hate the cams.
it's not that I forgot to torque anything, it's that I didn't check.
or maybe the cam seized. but when I took the valve cover off, the cam gear nut was no where near being tight. |
Re:hah. hahah. sigh. hate the cams.
nice x's
|
Re:hah. hahah. sigh. hate the cams.
be back in a moment
|
Re:hah. hahah. sigh. hate the cams.
i don`t see nothing worng?????
except those metal powder . |
Re:hah. hahah. sigh. hate the cams.
I'm missing a picture, hold on
|
Re:hah. hahah. sigh. hate the cams.
Ouch, that really sucks :-\ What cams were those, factory?
|
Re:hah. hahah. sigh. hate the cams.
b20b cams in a b18a. no real difference, just for fun.
|
Re:hah. hahah. sigh. hate the cams.
|
Re:hah. hahah. sigh. hate the cams.
I forgot to torque my cam gear bolts once. It sounded like a diesel b16a. ::)
|
Re:hah. hahah. sigh. hate the cams.
2 of the times I took my b16 head apart I didn't put oil on the cams or cam seats before I started it up, the cams are all scratched up, but they never seized or anything.
|
Re:hah. hahah. sigh. hate the cams.
upon loosening the number 4 exhaust keeper, the cam rotated. so that one was a bit tight.
=/ even had a fancy torque wrench. |
Re:hah. hahah. sigh. hate the cams.
Originally Posted by warric_k
|
Re:hah. hahah. sigh. hate the cams.
Take the cams out, put the stock ones back in, clean the ---- out of the cam caps and front side of the timing cover, replace the keyway for the cam gear. Emory cloth any rough edges or grooves in the head or cam caps, and re-install everything. You will be fine, I've seen way worse that ran.
Jeff |
Re:hah. hahah. sigh. hate the cams.
and change your oil + filter ;] it will be loaded with metal shavings if u ask me
|
Re:hah. hahah. sigh. hate the cams.
no metal shavings at all though... other than the outer part of the valve cover. it really just.. stopped moving.
so you don't think I bent valves or anything? |
Re:hah. hahah. sigh. hate the cams.
HAH
IT RUNS! |
Re:hah. hahah. sigh. hate the cams.
nice
|
Re:hah. hahah. sigh. hate the cams.
|
Re:hah. hahah. sigh. hate the cams.
i have a set of stock cam gears out of a b16a if you are interested.
|
Re:hah. hahah. sigh. hate the cams.
thanks, but I've got my old cams in, and when I throw the new head on, I'll just yank my old cam gears off
|
All times are GMT -5. The time now is 07:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands