guess i'll post a quick show of my project (85 mr2)
 

Turbo is going to be "remote mount" on the intake side....

at first will use stock electronics, with larger injectors (hopefully can find some 300cc/min 3sgte/7mge injectors easily)....

no manifold is required.... the turbo inlet will be just about 'right in the path' of the stock exhaust system..... the exhaust will exit through the trunk firewall and down through the floorboard

intercooler piping will cross the engine, battery will be relocated (and a smaller IC located there) and then a straight shot into the intake manifold

turbo is a ct20 from an (non us) oldschool corolla (3tgte).... I already reclocked it for oil drain and to relocate the turbine outlet pipe


have to run to class..... photobucket is going too slow... will post pictures later

Re: guess i'll post a quick show of my project (85 mr2)
 

looks really nice ::)

Re: guess i'll post a quick show of my project (85 mr2)
 

No porn, No pics at all

Re: guess i'll post a quick show of my project (85 mr2)
 

no pictures no read

Re: guess i'll post a quick show of my project (85 mr2)
 

Re: guess i'll post a quick show of my project (85 mr2)
 

Please note :)

*I own teh internets

Attachment 31992
Attachment 31993
Attachment 31994
Attachment 31995
Attachment 31996
[img width=576]http://i3.photobucket.com/albums/y82/toyotaspeed90/MR2/DCP_0037.jpg[/img]
[img width=576]http://i3.photobucket.com/albums/y82/toyotaspeed90/MR2/DCP_0036.jpg[/img]

Re: guess i'll post a quick show of my project (85 mr2)
 

But Buk owns you...

Buk owns the internets? ----!

Re: guess i'll post a quick show of my project (85 mr2)
 

Buk doesnt own me; he uses Yahoo as well and I hate yahoo. :P

Re: guess i'll post a quick show of my project (85 mr2)
 

How much do those things weigh?

I see them on CL all the time for cheap cheap.

Re: guess i'll post a quick show of my project (85 mr2)
 

thats gona be quick

Re: guess i'll post a quick show of my project (85 mr2)
 

too bad you got the wrong car.... i sold that one back in august.....

that car had an ae101 4agze engine, mr2 s/c e51 transmission & axles, TRD japan racing clutch & PP, new everything, single in/dual out flowmaster exhaust, running on megasquirt (MS1 v2.2).... got that car first running on MS about 2 years ago now.... that car (not tuned at all) would probably have made a high 13 sec. pass... the longblock, supercharger, and pulleys were all stock

project i was talking about:

on the mock-up motor (all garbage, except the head *could* be used)
Attachment 31989

initial placement (with first bracket):
Attachment 31990

a change of plans (moved) and a second bracket to support it (and the exhaust will also help support it):
Attachment 31991

i've decided to keep the wastegate actuator off (for fitment purposes) and go with an external wastegate & dump pipe.... people say it will be loud, but i can guarantee it won't be louder than my old mr2 (shown above).

this is my 4th mr2..... currently have two right now, and an ae92 (corolla) with a motorswap & some other strange things