Good god, H-T is a bunch of HATERS!
 

Well it's what I would expect from H-T, but sometimes they just suck a little extra.

Check it

http://honda-tech.com/zerothread?id=1291056&page=1

Re: Good god, H-T is a bunch of HATERS!
 

I didnt see that many responses that they were actually hating, mabye like 2 or 3. I couldnt help but laugh at the picture either :P But it'll hold fine, and you gotta start welding somewhere. Good job on the DIY :)

Re: Good god, H-T is a bunch of HATERS!
 

Jesus, those are pretty wicked Welding skillz, j/p i have never welded in my life, but if i did i think it would be close to that all good brotha

Re: Good god, H-T is a bunch of HATERS!
 

thats why you don't post on that site.

Re: Good god, H-T is a bunch of HATERS!
 

first of all how old is that pic

you wanted to get hated on u crazy bastard ;D

Re: Good god, H-T is a bunch of HATERS!
 

none of those guys have fast cars. why would anyone listen to them.

i fluxcore gasless welded ---- just like that. never cracked, never broke, never anything. it sits exactly the same as it was when i welded it up.

welding cast is easy.

Re: Good god, H-T is a bunch of HATERS!
 

thats cuz fluxcore is the ----
and if u do it right it looks clean too

Re: Good god, H-T is a bunch of HATERS!
 

Yeah, but I'm sure you expeced the reaction that you got.

I didn't see that many posts really hating on you though, only a few.

Re: Good god, H-T is a bunch of HATERS!
 

the "it looks like the tin man jizzed on your down pipe" was pretty funny 8)

Re: Good god, H-T is a bunch of HATERS!
 

u asked for a flame session by posting on that site...

Re: Good god, H-T is a bunch of HATERS!
 

More of the flaming is on the 2nd, 3rd page. But yea, I did expect it, it's just funny how some of them think that I did the worst thing in the world and that it will make no power, blah blah blah. It flows nice

Re: Good god, H-T is a bunch of HATERS!
 

Not that I know the first thing about welding, but you'd probably think that looked like ---- too if someone else did it, and it does look like ----. Of course it doesn't really matter if it holds and it works, but why would you make a thread about a shitty weld, knowing it'd get made fun of, and then complain about it?

EDIT - I'm sure it won't look half as bad after cleaning it up a little bit.

Re: Good god, H-T is a bunch of HATERS!
 

I'm not complaining, just stating the obvious, H-T hates on everything that doesn't cost 1 meeleeon dollars or come from Japan.

Re: Good god, H-T is a bunch of HATERS!
 

who gives a ----?? if it works it works. they think if ---- looks good it must work good. ie: Full race it looks good so it must be the best :-\

Re: Good god, H-T is a bunch of HATERS!
 

I can kinda agree on that. Just gotta ignore those people because they really don't know what they're talking about. Not all of HT is like that. There are some people that know the difference between a quality part and inflated brand name ----...

Re: Good god, H-T is a bunch of HATERS!
 

i think its gonna get a little heated now ::)

http://honda-tech.com/zerothread?id=1291056&page=3

Re: Good god, H-T is a bunch of HATERS!
 

haha.. nice. i think your image is broken though

Re: Good god, H-T is a bunch of HATERS!
 

ok so i suck at life. at least i'm not same bandwagon faggot like those fuckers

Re: Good god, H-T is a bunch of HATERS!
 

eh doesnt matter, its showing up now. And bandwagon people = the suck

Re: Good god, H-T is a bunch of HATERS!
 

Ahaha I love you guys. Anybody know how to e-rape someone?

Re: Good god, H-T is a bunch of HATERS!
 

Not sure, but make sure you use an e-condom.

Re: Good god, H-T is a bunch of HATERS!
 

I don't even post stuff like that on HT cause all you get is just "that is ghetto, horrible, where'd you learn to weld, blah, blah, blah.... I only go on to that site to sell ----.

Re: Good god, H-T is a bunch of HATERS!
 

...you knew what they would say.

Re: Good god, H-T is a bunch of HATERS!
 

Re: Good god, H-T is a bunch of HATERS!
 

Ah.. dur :P

Re: Good god, H-T is a bunch of HATERS!
 

LOL. You posted it in the welding and fab forum dude. You knew we were going to rape that thread before it even started. You won't find many bandwagoniers in that section of H-T becuase we are the ones who know how to make our own ----. You could have asked before welding it and we would have helped you out ;)

ps I weld cast iron to mild steel all day long. In fact I'm still at work right now. :P if it cracks find someone with a stick welder and use NI-ROD 99X electrodes. ---- thats the 1/8 ones. get whatever the 3/32 is....might be 55X or something like that.

You could try silicon bronze with a tig (or even an oxy/act) if you wanted. I'm not sure on the melting temp of it though. This ---- welds like freakin butter if you can swing it plus it's only ~11/lb compared to the ~20/lb for the NI-ROD.

Re: Good god, H-T is a bunch of HATERS!
 

use a helmt next time so you can look at what you're doing... and atleast try to make a weld pool. Other than the complete assness of it, I think it looks good.

Re: Good god, H-T is a bunch of HATERS!
 

Well.... I have shot loads that look prettier than your welds.... ;D ;D ;D

Other than that, 80% of H-T is made up of cunty ricers who wouldnt know the difference between your welds and my cum shots. Not because your welds are ugly, but because they're ricers.

Dont take their ---- seriously.