|
GM syncro mesh
ok GM syncro mesh. can it only be found at GM dealers? i'm going to put it in my trans once i get my engine back.
also anyone here useing it? |
Re: GM syncro mesh
http://www.pennzoil.com/products/gea...cro_fluid.html
cheeper, same ---- |
Re: GM syncro mesh
Autozone has the pennzoil, same part number as the GM stuff, and fraction of the price.
|
Re: GM syncro mesh
correct me if im wrong but isnt that ---- too thick for hondas...or is this going into something else
|
Re: GM syncro mesh
Originally Posted by ghettoturbo
correct me if im wrong but isnt that ---- too thick for hondas...or is this going into something else
|
Re: GM syncro mesh
works great, i've been using it for a few years now
|
Re: GM syncro mesh
Originally Posted by buk9tp
for the transmission i believe
|
Re: GM syncro mesh
Is it going into a honda? If so I'd just buy Honda MTF.
|
Re: GM syncro mesh
i mix 50 h mtf and 50 gm syc. been doing this since i read the post on hmt a few years back it usually takes away my grinds. :)
|
Re: GM syncro mesh
honda just realeased a new mtf its supposed to be every bit as good as the synchromesh
|
Re: GM syncro mesh
Pennzoil is great.
/thread JP |
Re: GM syncro mesh
Originally Posted by abnaasefmb
works great, i've been using it for a few years now
|
Re: GM syncro mesh
i hear by using synchromesh you can walk sti's all night long
|
Re: GM syncro mesh
Originally Posted by Toysrme
i use synchromesh to sqeeze gerbils in my ass all night long
|
Re: GM syncro mesh
Got an extra year out of transmission that would grind into almost gear, so I say use if you need it.
|
Re: GM syncro mesh
Originally Posted by biggmike2
Got an extra year out of transmission that would grind into almost gear, so I say use if you need it.
but in the end, you still need new sychros |
Re: GM syncro mesh
I skeeted into the VSS hole and made new syncros. :6
|
Re: GM syncro mesh
Originally Posted by tekno9998
honda just realeased a new mtf its supposed to be every bit as good as the synchromesh
10w30 or 10w40 motor oil, never a bearing failure or synchro issue. |
Re: GM syncro mesh
You think the new honda MTF is more aimed at the new honda manual gear boxes rather than our 10+ year old D and B seres stuff bone?
|
Re: GM syncro mesh
i'll be picking up the penzzoil today when i p/u up some plugs.
|
Re: GM syncro mesh
i hade a grind in 3'rd gear at anything above 4k rpms's. replaced my trans fluid with some honda MTF and the grind was gone. smoother shifting as well.
|
Re: GM syncro mesh
I'll have to give the pennzoil syncromesh a try...4th and 5th gear grind pretty good going in at any rpm above 4k also. 5th gear is getting to the point I have to double clutch it just to keep it from grinding. :P
Funny though, it doesn't grind at all when it's cold with normal 10w30 oil. :l |
Re: GM syncro mesh
Originally Posted by stillnoturbo
I skeeted into the VSS hole and made new syncros. :6
|
Re: GM syncro mesh
hands down best tranny oil for hondas. You need the friction modified stuff instead of the regular stuff though, the pennzoil stuff is non fm. I run syncromesh FM in my TL's 6sp
|
Re: GM syncro mesh
Originally Posted by accordepicenter
hands down best tranny oil for hondas. You need the friction modified stuff instead of the regular stuff though, the pennzoil stuff is non fm. I run syncromesh FM in my TL's 6sp
----... i need the FM stuff?? i thought it was the other way around..... Guess i better go trade it in... thought i was going to be able to finish this thing today... dammit |
Re: GM syncro mesh
Originally Posted by bigdaddyvtec
----... i need the FM stuff?? i thought it was the other way around..... You and Henry need to hang out. |
Re: GM syncro mesh
Originally Posted by Joseph Davis
What, the FM stuff needs you? You been skeeting into the bottles or something?
You and Henry need to hang out. THX |
Re: GM syncro mesh
Nothing can hurt or help shitty H-series. It was the test bed for K-series, after all!
|
Re: GM syncro mesh
Originally Posted by Joseph Davis
Nothing can hurt or help shitty H-series. It was the test bed for K-series, after all!
LOL Id call, but i already know the result... |
Re: GM syncro mesh
Correct. I wouldn't give you the satisfaction of answering.
It's not that I dislike you, in fact I have the utmost respect for you... it's just that I never want a man like you to associate me with satisfaction. You make Pee Wee Herman look stable, dude. |
Re: GM syncro mesh
Originally Posted by Joseph Davis
Correct. I wouldn't give you the satisfaction of answering.
It's not that I dislike you, in fact I have the utmost respect for you... it's just that I never want a man like you to associate me with satisfaction. You make Pee Wee Herman look stable, dude. |
Re: GM syncro mesh
Let me ask you people one thing.......
Who has been making it almost a business of building trannys? Who has yet to have a bearing in HIS or a CUSTOMERS tranny fail? I'll let the facts speak for themselves :) Too date I've only had one tranny come back and it was this weekend. Shift rod into the tranny came loose. Three ways it could have happened 1) I left the beveled lock washer off and it worked loose 2) I failed to fully tighten the bolt and it finally backed out 3) I did everything right and it came loose (right, JD's a ------- saint if you believe that!) |
Re: GM syncro mesh
I'm either a saint, or a demon in disguise.
|
Re: GM syncro mesh
You need the other ----. I never really paid attention to what bottles you had.
|
Re: GM syncro mesh
lol
|
Re: GM syncro mesh
i thought you dont want the friction modified ---- for non lsd. ---- i gotta exchange it
|
Re: GM syncro mesh
so what one are we suposed to use. i'm lost... i hate being a noob
|
Re: GM syncro mesh
What Mista Bone uses. Everyone else in this thread put together has collectively owned half as many trans as he has built. They are n00bs by comparison.
|
Re: GM syncro mesh
Originally Posted by Racintweek
but in the end, you still need new sychros
|
| All times are GMT -5. The time now is 03:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands