ghettoturbo's Turbo Hatch (no 56k)
 

Hosting/Posting these pics for him:
http://www.silvercircleeast.com/ghettoturbo/1.jpg
http://www.silvercircleeast.com/ghettoturbo/2.jpg
http://www.silvercircleeast.com/ghettoturbo/3.jpg
http://www.silvercircleeast.com/ghettoturbo/4.jpg
http://www.silvercircleeast.com/ghettoturbo/5.jpg

Re:ghettoturbo's Turbo Hatch (no 56k)
 

very very nice, really clean. the car looks just as it should, dropped to the deck, black headlights, no spoiler or ---- and a massive front mount. props for a perfect EK!!




The Brett

Re:ghettoturbo's Turbo Hatch (no 56k)
 

I'm totally diggin it ;D

Re:ghettoturbo's Turbo Hatch (no 56k)
 

Thanks a lot guys, and thanks to BlinD for hosting these pics. The car still looks the same, but the turbo setup(minus fuel setup) went on that blue del sol in the backround the day of those pictures, and the motor is all apart waiting for me to finish it.

Re:ghettoturbo's Turbo Hatch (no 56k)
 

pimp, nice intercooler :)

Re:ghettoturbo's Turbo Hatch (no 56k)
 

i bet your tires love that camber :P just ------ with you, looks good. it's a hard decision for me to get a rex or a newer hatchie :-\

Re:ghettoturbo's Turbo Hatch (no 56k)
 

i would have gotten a 96+ hatch but my rex only cost me $2,000 CAD$. :)

but ya, i would have gotten a silver one too!

but i love it.. yah camber is a "little" off, but it looks really clean which is what i like!

Re:ghettoturbo's Turbo Hatch (no 56k)
 

lol the camber looks worse than it really is because the wheel is cut a little...but i dont mind. If i was to straighten it out, the tires would rub.

Re:ghettoturbo's Turbo Hatch (no 56k)
 

------ Sweat!! How many psi are you running and what have you raced yet? Any Major kills??

Re:ghettoturbo's Turbo Hatch (no 56k)
 

major kills? just that poor little squirrell he ran over last week :'(

Re:ghettoturbo's Turbo Hatch (no 56k)
 

I see how you do, trying to hate on us 56k users. It only took 5 minutes for those pictures, not that long. I would have done something different for your afr gauge wire, maybe along the bumper or something.

Re:ghettoturbo's Turbo Hatch (no 56k)
 

crx88si: this car only cost me 2500 US, im not sure how that converts...and i hate the fact that my car is silver like all the other ek's i see here

greddycrx: i was running 13psi, which was good enough to beat new mustangs, a friends lt1 camaro, an eg hatch with a type-r swap, etc, etc,...but the clutch was shot so going off the line was tough

kyle: the wire was the right length for my old manifold, when i made this one, i didnt feel like adding onto the wire

Re:ghettoturbo's Turbo Hatch (no 56k)
 

only 2500 US!?!?!?! how the hell do u pull that off? salvage title? what year? Milage? 2500 = 3500 CAD. I wish we could get that price around here.. damnn it.. lucky sob. lol

3500 for car + 3000 for gsr = smokin hatch.. damn you!

Re:ghettoturbo's Turbo Hatch (no 56k)
 

its a 96, no salvage, but it had like 155k on it from one owner who worked like an hour away

Re:ghettoturbo's Turbo Hatch (no 56k)
 

What can I say? Im a 56k hater. ;) Now I'd like to see pics of the sol. ;)

Re: ghettoturbo's Turbo Hatch (no 56k)
 

whats up with your bov.. am i the only one that noticed this!?!?

http://soultronics.com/sk/images/wtf.jpg

Re: ghettoturbo's Turbo Hatch (no 56k)
 

lol return from the dead 2 years

you know its a GT car when its dumped to the ground ;)

Re: ghettoturbo's Turbo Hatch (no 56k)
 

You -------. I was a bit confused when I was looking at the pics and seen a D series and Si rims on an EK hatch.....then I started looking for the asshat that bumped this back up from 2 years ago. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Looks like a face. wow. :P

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Haha I was too. I was like "Wait a minute... I have video of his turbo coupe... he's got a hatch too?"

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Why'd you steal my manifold design? >:(



The lawsuit is in the mail. >:D

Re: ghettoturbo's Turbo Hatch (no 56k)
 

hey steve.. i ordered an T3 oil line kit from you today.. im excited to finally put my kit together.. im just looking for pipes now for my ic piping..! O0

Re: ghettoturbo's Turbo Hatch (no 56k)
 

I like his current setup better :D

Re: ghettoturbo's Turbo Hatch (no 56k)
 

I was checking this thread out and I saw that I had already replied to it, and I didn't remember replying to it. that's my indicator that the thread is old.

Re: ghettoturbo's Turbo Hatch (no 56k)
 

i never trust oil lines that are rubber and clamped down with those O clamps. i use that on my first setup and the first time i floored it and hit boost the oil line popped off and was squirting oil all over my engine bay n i never cleaned it since. i prefer steel braided and threaded. other then that nice setup.

Re: ghettoturbo's Turbo Hatch (no 56k)
 

How does that bov sound?

Re: ghettoturbo's Turbo Hatch (no 56k)
 

those arent just regular rubber hoses, they are aeroquip oil lines...never had one problem. And the bov was ok, not too loud. And this setup has been on about 4 other cars by now, and the car has been sold and crashed :(

Re: ghettoturbo's Turbo Hatch (no 56k)
 

LOL. That's pretty wierd. Hey, did anyone notice in this pic that on the right side of the turbo (cold side) there looks like an oil nipple with no oil line on it. What's the deal? That confused me. Is that for like a water-cooled line? Thanks!


JP

Re: ghettoturbo's Turbo Hatch (no 56k)
 

its the vacume line source from the compressor housing to the wastegate.... not an oil line

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Oh snap! LOL. I knew that ::) Thanks for answering that and not flaming on me. ;)


JP

Re: ghettoturbo's Turbo Hatch (no 56k)
 

i like how he welded the o2 housing right to the exhaust housing

Re: ghettoturbo's Turbo Hatch (no 56k)
 

i used rubber oil lines on my fiorst setup for about 8 monthas with zero hiny of problems, id use em again if i was in a tight spot money wise

Re: ghettoturbo's Turbo Hatch (no 56k)
 

man i got my steel braided lines n fittings for like 40 bux at. that was well within my tight budget n less to worry about. that's one problem i wouldn't wanna have to think about or worry bout... IMO

Re: ghettoturbo's Turbo Hatch (no 56k)
 

a rubber feed kit can be constructed for less than 10 dollars.

Re: ghettoturbo's Turbo Hatch (no 56k)
 

lol that was the kid who had the turbo before me...i didnt mind because i got it for 23 bucks

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Hahah. That bov like like face.

Anyways pretty cool setup.

Re: ghettoturbo's Turbo Hatch (no 56k)
 

Does the car still look the same... this was a while ago. ^-^

Re: ghettoturbo's Turbo Hatch (no 56k)
 

read up a bit...the car was sold about a year ago and it was recently hit by a truck