HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   getting a built head with my parts car (https://www.homemadeturbo.com/general-discussion-6/getting-built-head-my-parts-car-54174/)

RotaryGeek 01-19-2006 12:25 PM

getting a built head with my parts car
 
yeah so if you saw the thread about the parts car (89 hatch $60) the guy is throwing in a head. it has an AEM tru time cam gear on it. i thought that was pretty cool until i talked to this other guy, he has the built bottom end to the head. he said it has a sohc zc cam, valves, valve springs, retainers, and the cam gear. he said he fried the block, but the pistons and rods are good. high compression, like 11.4 to 1 or somewhere in that area. he told me i can get them for $100. when the motor wasnt fucked, he was eating up b16's with it, not highly modded, but b16's. for a single cam non vtec, that is really good. especially around here. not a whole lot of people are into the single cams around here, so parts are cheap - when you can find them.

HondaTuner 01-19-2006 12:28 PM

Re: getting a built head with my parts car
 
woo woo

88crxSi 01-19-2006 01:34 PM

Re: getting a built head with my parts car
 
an aem cam gear does not mean its built. ::)

davcivic 01-19-2006 01:48 PM

Re: getting a built head with my parts car
 
is it just a SOHC ZC head with an aem cam gear????stock parts, or are you saying he actually bought aftermarket parts ??? ??? ??? ??? ???

for $100 I don't know....

RotaryGeek 01-19-2006 07:37 PM

Re: getting a built head with my parts car
 
No, its actually a built head. its an SI head with a ZC cam. It has aftermarket valves, valve springs, and retainers. and the cam gear. and i get the whole car and the head for $60 - not $100

tr4cti0n.i55ues 01-19-2006 07:48 PM

Re: getting a built head with my parts car
 
for that price it sound like a stock head w/ a cam gear. it will be slight improvement over a stock a6 cam but not much

davcivic 01-19-2006 09:43 PM

Re: getting a built head with my parts car
 
even if it is still a stock head, it is not bad for $60. Get it and see if you can take pictures of the head, maybe we can tell if it is in fact built. If he did it ask for specs, brands and such. It will be nice to know so you know what you are doing later on.

RotaryGeek 01-19-2006 11:21 PM

Re: getting a built head with my parts car
 
no see, he doesn't know anything about the head- just wants to get rid of it. i talked to the guy who built the head, he told me about it. the guy who has it now just wants it out of his garage.

davcivic 01-20-2006 11:51 AM

Re: getting a built head with my parts car
 
the don't think about it an snatch that bitch!!!!!

Tom-Guy 01-20-2006 11:54 AM

Re: getting a built head with my parts car
 
A SOHC ZC cam is the same as an A6 cam... or close enough not to worry about.

tr4cti0n.i55ues 01-20-2006 12:25 PM

Re: getting a built head with my parts car
 
take it and if it is built then you are lucky if not then you only paid 60 for it and a parts car. are you the one with that wack ass hood if so does the parts car come with another hood

RotaryGeek 01-24-2006 03:17 PM

Re: getting a built head with my parts car
 
haha yeah thats my car with the wack ass hood, it does have a hood so it will get on there

N1ghtM0nkey 01-24-2006 03:22 PM

Re: getting a built head with my parts car
 
I couldn't make a whole lot of sense out of your post but if the head isn't ported and polished I wouldn't really call it built. A mediocre cam with upgraded valvesprings and retainers isn't really a big upgrade. Now if it was a fat cam...I could understand.

Guy-Fast 01-24-2006 03:42 PM

Re: getting a built head with my parts car
 
I would be shocked to see aftermarket springs in an a6 head because there not needed unless your running a monster of a cam


All times are GMT -5. The time now is 03:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands