Fuel Management System
I plan on turboing my own engine which is a vauxhall engine.
When going under boost ( higher levels ) I need a Fuel Management system and a system that is going to retard my ignition. I have found out that the MSD 6BTM will retard my ignition when under boost. Now I need to know a good Fuel management system. I hear a lot about Zdyne and hondata but since I am not going to turbo a honda engine I need to use another system. Is it possible to use the vortech FMU at first to experiment a little or do you guys advise a Standalone fuel management system? If so what kind of management will work? |
Re:Fuel Management System
vauxhall those are funny cars i had one come into my work what a pos. im sure some sort of afc could work then get bigger injecters.
Beau |
Re:Fuel Management System
Originally Posted by BLACKSI
vauxhall those are funny cars i had one come into my work what a pos. im sure some sort of afc could work then get bigger injecters.
Beau Sorry but what do you mean with "what a pos"? I am not english so I don't understand. |
Re:Fuel Management System
"Piece Of ----"....
|
Re:Fuel Management System
Hmmmmm
that's your opninion. I don't know what vauxhall you had in your garage. this is my car: http://www.opelfriendsforever.nl/images/205.jpg It's a vauxhall cavalier ( Opel vectra A ) 2.0 16v ( 150hp ) 4x4 |
Re:Fuel Management System
I have found something else while looking in to the turbo projects.
It was a kit which uses 2 extra injectors which are placed just before the TB and they spray extra fuel. Is this a system that works or do you advise to use another setup? |
Re:Fuel Management System
that system does work, lots of people with hondas use larger injectors with devices that pulse them slower. but the additional injectors can work just fine.
Jeff |
Re:Fuel Management System
your right your car looks very nice the one we had in our shop was like a 1950 oupe deal looked like the owner had just repainted it with house paint and a brush
Beau |
Re:Fuel Management System
Originally Posted by shockwave
I have found something else while looking in to the turbo projects.
It was a kit which uses 2 extra injectors which are placed just before the TB and they spray extra fuel. Is this a system that works or do you advise to use another setup? It is very easy to setup and is fully adjustable from inside the car. You can adjust the threshold and gain from inside the car. This system is a complete standalone and can be used on other cars in the future. I chose to use this because I could not use zdyne on my car, 86 crx with PG7(86 integra ecu with vacuum advance). I am also running a full MSD ignition, MSD6al, MSD BTM, Blaster 2 coil, and msd wires. http://www.sdsefi.com/eic.html |
All times are GMT -5. The time now is 12:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands