HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Found ZC in Junkyard (https://www.homemadeturbo.com/general-discussion-6/found-zc-junkyard-45162/)

solutionzero 08-28-2005 09:31 AM

Found ZC in Junkyard
 
Alright well I went to a local junkyard yesterday just browsing around and I saw a CRX with an "african-american" paint job like orange with wierd shooting stars and murals and ----. I decided to take a look and in the bay sat a b18a1. No big deal because they are all over the place. But then I see a motor sittin in the back end under the hatch. I pop the hatch and look at the stamp on the block and it says ZC. It is only a SOHC and the valve cover didn't look much different form a d series. Is also has the transmission still bolted up to it. How can I identify what transmission it is? Is there a stamp somewhere on the tranny? Is this worth buying and selling? What could I make off selling a full sohc zc swap? If anyone is interested in buying say so. Thanks.

nitrofish420 08-28-2005 10:12 AM

Re: Found ZC in Junkyard
 
Does it appear to be in decent shape?

GodJockey 08-28-2005 10:30 AM

Re: Found ZC in Junkyard
 
I don't mean to sound stupid, but aren't b18's worth more than ZC's?

HondaTuner 08-28-2005 10:33 AM

Re: Found ZC in Junkyard
 

Originally Posted by GodJockey
I don't mean to sound stupid, but aren't b18's worth more than ZC's?

Yeah, but maybe he'll be able to buy the ZC swap cheaper and make some nice $$$

bumblezc 08-28-2005 10:39 AM

Re: Found ZC in Junkyard
 
The only way I can think of IDing the tranny is that the Axle Splines and Sizes are different the an Si's tranny.

NBLKID 08-28-2005 11:21 AM

Re: Found ZC in Junkyard
 

Originally Posted by bumblezc
The only way I can think of IDing the tranny is that the Axle Splines and Sizes are different the an Si's tranny.


Bone1 08-28-2005 12:17 PM

Re: Found ZC in Junkyard
 

Originally Posted by bumblezc
The only way I can think of IDing the tranny is that the Axle Splines and Sizes are different the an Si's tranny.

what you smoking up there?????????

DX and Si trannys look exactly the same from the outside except for one little letter...........

they use the same axles..........

bumblezc 08-28-2005 12:31 PM

Re: Found ZC in Junkyard
 
Ya, but the JDM ZC uses the larger spline from the Integra, and the Si/DX/EX or any USDM D-Series(minus the 86-89 Integra) used the smaller Unequal Shafts and spline. Right? Or did I convert my Equal Length DOHC ZC tranny to Unequal USDM Si Axle when i went to my LSD for nothing?

Dibble 08-28-2005 01:12 PM

Re: Found ZC in Junkyard
 
Look and see if its the LSD one.

JEDubz 08-28-2005 01:40 PM

Re: Found ZC in Junkyard
 
Either way, my guess is the junkyard is going to charge you an arm and a leg for it. I personally would focus on stealing pieces of the B-series swap


All times are GMT -5. The time now is 07:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands