bambooseven

My turbo is in, Stealthmode, --------, 88 turbo crx, and I installed most of it on sunday, then the charge pipes were built. it finally got all together yesterday. It is fast, but it needs some work. i'll post in the FI forum about the problems.



Thanks to Stealthmode, --------, 88 turbo crx, Jeff, and all of HMT I couldn't have done it without you guys.


Install

1: Stealthmode is a planeteer
www.gimptrain.com/turbo/install/1.jpg
2: Old cluster comes out new one goes in (with guages)
www.gimptrain.com/turbo/install/2.jpg
3: Dont need that anymore
www.gimptrain.com/turbo/install/3.jpg
4: -------- the electrical genius (well, he knows how to solder)
www.gimptrain.com/turbo/install/4.jpg
5: Stealthmode's lack of depth perception
www.gimptrain.com/turbo/install/5.jpg
6: Blue tops (no i'm not talking about the breather)
www.gimptrain.com/turbo/install/6.jpg
7: That drill had BARELY enough power to do that
www.gimptrain.com/turbo/install/7.jpg
8: It came out good though
www.gimptrain.com/turbo/install/8.jpg
9: The vacuum manifold installed, well, before the gobs of
JB weld it needed to seal
www.gimptrain.com/turbo/install/9.jpg
10: We've all seen this thing 1000 times
www.gimptrain.com/turbo/install/10.jpg
11: Feed line
www.gimptrain.com/turbo/install/11.jpg
12: 10+11=12
www.gimptrain.com/turbo/install/12.jpg
13: Hehe, thought it wouldn't be right leaving this there
www.gimptrain.com/turbo/install/13.jpg
14: That's as high as the jack would go
www.gimptrain.com/turbo/install/14.jpg
15: This is -------- at his finest
www.gimptrain.com/turbo/install/15.jpg
16: My pretty coolant line(s)
www.gimptrain.com/turbo/install/16.jpg
17: The end product of sunday night
www.gimptrain.com/turbo/install/17.jpg

Charge pipes

1: This is the shop where I got my charge pipes done
www.gimptrain.com/turbo/charge/1.jpg
2: This is the shop dog
www.gimptrain.com/turbo/charge/2.jpg
3: The car on the lift
www.gimptrain.com/turbo/charge/3.jpg
4: My beautiful downpipe
http://www.gimptrain.com/turbo/charge/4.jpg
5: Freddy, my exhuast guy
www.gimptrain.com/turbo/charge/5.jpg
6: A pic of the setup from the underside
www.gimptrain.com/turbo/charge/6.jpg
7: The downpipe on the car
www.gimptrain.com/turbo/charge/7.jpg
8: IC to TB
www.gimptrain.com/turbo/charge/8.jpg
9: IC to TB and BOV
www.gimptrain.com/turbo/charge/9.jpg
10: IC
www.gimptrain.com/turbo/charge/10.jpg
11: The setup, in the light with the DP
www.gimptrain.com/turbo/charge/11.jpg
12: Freddy is a funny guy
www.gimptrain.com/turbo/charge/12.jpg
13: Don't look you'll burn your eyes
www.gimptrain.com/turbo/charge/13.jpg
14: My ugly intake pipe (2" to 3" very tight radius)
www.gimptrain.com/turbo/charge/14.jpg
15: The great cornholio
www.gimptrain.com/turbo/charge/15.jpg
16: End result of the past week
www.gimptrain.com/turbo/charge/16.jpg

Stealthmode's New Stuff

1: Fuel line Pic #1
www.gimptrain.com/turbo/stealthmode/1.jpg
2: Fuel line Pic #2
www.gimptrain.com/turbo/stealthmode/2.jpg
3: The new return line fitting
www.gimptrain.com/turbo/stealthmode/3.jpg
4: Fuel line Pic #3
www.gimptrain.com/turbo/stealthmode/4.jpg
5: Fuel line pic #4
www.gimptrain.com/turbo/stealthmode/5.jpg

My Tires

1: Racing stripes for speed and horsepower
www.gimptrain.com/turbo/tires/1.jpg
2: That's not a nail, thats where I stuck on my weight to balance my tires
www.gimptrain.com/turbo/stealthmode/2.jpg

R-MAK

Dam ! Nice job guys. Looks like Ghetto was the dirtyest outta you guys :P

Xplocivic

Those pics are too damn big! I wish peeps could figure out how to use a photo editor before they posted. Looks good though. that one set of pics for the charge pipes wasn't working for me, but i could view everything else.

OnYx

good job i like stelthys fittings. One problem, ALIGNMENT IS GOOD lmao

d16forlife

Damm.I could of made it if Steve would of answered his phone .No wonder it took you guys till midnite to finish....that jack wasnt worth jack!..lol

Stan

What did you seal the stealthmode oil and fuel lines with around the fittings? looks like white grease or something.. and how did you attach the oil return line to the oil pan?

Stan

traff1c

For the polls... none of us used gloves. and i was picking dried up oil crumbs out of my hair that night, i burned myself twice with the soldering iron, banged a knuckle removing the oil sensor, and kiss the oil pickup cause the fuckn cat wouldnt lift any higher... but all in all it was fun.


ps... god damn i look fat... i think somethings wrong with your camera

bambooseven

I used teflon tape. You should too.

GHetto, the camera is fine, you're just fat

MikeJ-2009

Yeah, I had a good time. Damn Bamboosle, when you said your downpipe looked good, "yo *** wassn't lyin' foo."
And just to let the rest of HMT know, Dru didn't want to start it at like 1am when we finished. No downpipe, no charge pipes, but me and ghetto D weren't leaving till we heard that thing. Damn, peer pressure sucks! (I told him I'd call him a bitch here too.) That worked.

91AccordLX

Damn I was just going to comment on your tires from just looking at the first pic.. LOL just get some new tire hookups from StealthMode like he hooked me up with wheels! OH WAIT Stealthmode still hasn't called me back to get some!!!