fitting ek front end ,to a eg civic??
 

I am currently spraying my eg civic sedan and i wouldnt mind putting a ek front on it,seens that the ek sedan has pretty much the same back i think it should make the car look a bit newer.Has any body done this before?also would the bonnet and fender fit straight on?can Anybody give me a shopping list on what ill need?

Re:fitting ek front end ,to a eg civic??
 

to put a 99 front end on a let say a 92 sedan of coupe or hatch well you have to cut the fender at the wheelwell that liyttle part like 3-4 inches keep the fender from the door to the cut then cut the 99 fender to the headlight. bondo that together. you need:
1. 99 raditor support
2. 99 fenders
3. 99 hood bolts on
4. 99 headlights
5. 99 bumper get the si looks like a si front end
then you get a 99 civic front end. i hope that answer your question

Re:fitting ek front end ,to a eg civic??
 

thanks for that,ill post pics when im done.

Re:fitting ek front end ,to a eg civic??
 

yea, like whiteb16crx said: gotta take off the ur front radiator support weld on the ek support...but the first thing i would do is...
1:take off ur whole front end cut stock fenders about 3 inch up from the bottom
2:take the ek hood and bolt it on
3:stick on the ek fenders..rivit too the stock eg fender flange on the bottom that connects to the car..under the side skirts..w/rivits
4:align everything up perfectly...
5:take the ek support slap it on...make everything match up...then weld it in place..
6:fiberglass/bondo over the rivits
7:slap all the other bs on headlights/grill/front bumper/

should be set to go...

i did my crx with 97 integra front like this...pretty ez convo...also has custom widebody and corvette tails...

sold the bitch rite after i got done with the body work...
kinda grew out of the "all show scene"
now im messign with the big boy stuff "TURBO" "SWAPS"
planning to h22T my ek or built lST

if u want pix check it out here:

http://onlineshowoff.com/index.asp?s...NTEGRAVETTECRX

Re:fitting ek front end ,to a eg civic??
 

Nice integra... uhh, crx... Haha, my custom body integ is going in for paint next weekend. I also have a taurbo kit to put on sometime soon. I can't wait. Nice jub though, it's very different. :)