FINISHED MY SETUP W/the IC -PICS-...
 

ok i finally FINISHED my setup WITH the ic now :D (just needs to be tunned)
88 crx dx,
jdm d15b block, non-vtec head, garrett T28, std manifold/bmc adaptor, dsm 450cc's, stealthmode oil lines, rx7 BOV, TE
https://i2.photobucket.com/albums/y1...Frontmotor.jpg
The "Ghetto Plug" it holds ok for the moment 8)
Attachment 38434
im not keepin the bumpers, so dont flame :-*
Attachment 38435
the stranier screen
Attachment 38436
Attachment 38437 .....BTW im only boostin 5-6 pounds,well untill she's tunned >:D

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

bumper

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

yah...if you read my other post you would know im gettin oem ones :-*

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

I know, all I said was bumper :P

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

hows she run?

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

its runs good! except open dp = semi syle :-\ ....pulls alot harder than i expected, 2nd gears is frekin awsome ;D

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

Tune it up and you'll be golden.

Good work.

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

frank design that kit for you :P

jk

"bumper"

Re: FINISHED MY SETUP W/the IC....56K keep on truckin...
 

seriously, wow that's ghetto

good job

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

wow mmang thats gheeeetoo!! i llike it!

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

haha, yah i really got to take my bov pipe to HomeDepo and find a bolt to plug it O0

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

You can spend alot of money to make it look nice, or you can keep it real.



Way to keep it real. ;)

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

That has to be one of the pimper HMT jobs... Great job.

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

almost as ghetto as mine. you have a wastegate. you dont need that. you dont need a down pipe either. you also need to put a hole in your block then patch it with jb weld. then you will be golden. ;)

that thing is pretty sweet though. i like it. O0

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

that's really awesome man. As Steve said, keep'n it real :)

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

well, i was runnin a the hi-tech carb spring for a week or so too! (remeber i pmed you with some questions about it) 8)
thanks for tha postive responses guys :)

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

i was wondering if you were the same guy....thats pretty funny. i would also add something to secure that screen a little better. with the way you have that thing rigged up, it will probably go through the turbo if something were to hit it. its just as good without it. :-\

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

yah it looks like its very weak and flexable, but it very strong accually it kinda hard bent it when its that small (had to use pliers) ??? good thing my momma has quaility kitchen accesories :-*

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

exactly. i say keep the ghetto plug

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

nice throw-back HMT build... very classy.

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

hey.. what kinda charge piping did you use there
looks awesome cuz it can bend

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

that ---- is def hurt up.....def homemade style

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

Haha... looks nice!

Is the compressor facing the block?

True HMT style O0

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

its flexable exhaust piping from autozone, there like 18" not bad for $6 a pop
yea its facing the block but it came with an elbow, if you look closely you can see the black rubber hose connected to it ;)

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

I like ur setup...true hmt style ;D good job. Let us know how it runs after the tuning

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

just in case some of you guys wanted to know how much this kit cost:
1. Garrett T-28 - $ 120
2. rx7 BOV - $20
3. HF mani - 30
4 Adaptor plate - $50
5. oil line kit - $75
6. pm6 with TurboEdit with datalogging port - $125-130 (forgot)
7. dsm 450cc Injectors - $35
8. FMIC bar & plate - $100
9. Flexable charge piping (5) - $33
10. misc..From HomeDepo (sad because 1/4 of my stuff from there :-X ) $30-40

Grand total : $618 Bugdet Boost 8)

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

awesome price!
hope it holds the heat n boost thou

Re: FINISHED MY SETUP W/the IC -PICS-....56K keep on truckin...
 

im postive it will becuase exhaust temps are MUCH higher than intercooled ..air? dont know what to call it, but you get what i mean ;)